Results 1 to 2 of 2

Thread: Trane Tracer BacNet Comm issues

  1. #1
    Join Date
    Jan 2012
    Location
    Kent, OH
    Posts
    1
    Post Likes

    Trane Tracer BacNet Comm issues

    Problem:

    Tracer Summit BacNet connection fails giving all points on graphic "???" signs.

    Fix:

    This process requires pushing connect, then choosing BacNet, typing the IP and this instantly fixes the problem. Every once in awhile however, the site stops talking. anyone have insight?

  2. #2
    Join Date
    Oct 2003
    Location
    On the bay fishing
    Posts
    770
    Post Likes
    Set up the communications in Site Configuration.

    Setup > Site Configuration > Communications > Configure > Bacnet/IP > Use BBMD > enter IP address, udp port > Finish and save
    Beware of the prophet trying to make a profit.

    There is less oxygen from knee level to the floor! Check it out next time you tie your boots.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •