Trane ch350 dynaview display

[coldrig]

Thanks ,it's seems such a waste to toss a perfectly good control.I did find a place online that will repair it,they must have accsses to renewal parts,i'll post later.

High Dilp172
Have you got spare for DynaView screen I have same problem like you.Thanks.

[Dilp172]

http://www.aliexpress.com/premium/tr...011&isrefine=y

[Healey Nut]

The screens can be resurrected with patience . Go to your fave auto store and buy one of the headlight restoration kits . Use the polish as directed and you can usually make them readable again . Then get CBT1625 and cover it up .

[coldrig]

http://www.aliexpress.com/premium/tr...011&isrefine=y

Thank you very much.

[Answer-Man]

I've got one even with the contrast turned all the way up I've had to make a sunshade for to see the display in the middle of the day. solution was to go in the morning before full light was on it

[otto]

Just changed a dynaview yesterday. No way to update the starts and hours? My rs232 cable took a crap while doing the job but I was able to get the model number in and it uploaded all setpoints. I had only two differences from defaults, setpoint and current limiting. Then lost all communications. Tried uploading new techview, nothing. It's up and running and I can see all my setpoints in the new module but I still want to try to update the starts and hours and see it run via my laptoop.

Yes, I know rehashing an old thread.

[R123]

What kind of chiller? It’s different for different chillers. And why rehash an old thread instead of starting a new one? Just curious.

[Healey Nut]

What kind of chiller? It’s different for different chillers. And why rehash an old thread instead of starting a new one? Just curious.

And why post this in the open DIY chiller forum