Results 1 to 4 of 4

Thread: Appion Tez8 issue

  1. #1
    Join Date
    May 2000
    Location
    Houston, TX, USA
    Posts
    408
    Post Likes

    Question Appion Tez8 issue

    I have been using the tez8 for years now with good results. I had my first issue with them this week. Was pulling down a process skid when the site lost 120v power. I had two pumps connected and both didn’t hold the vacuum. With no check valve in place the chiller is back to atmosphere. SMH

  2. #2
    Join Date
    Mar 2013
    Location
    East Concord, NY
    Posts
    22,058
    Post Likes
    there are refrigerant hoses with check valves built in.
    Nest is POO!!

  3. #3
    Join Date
    May 2000
    Location
    Houston, TX, USA
    Posts
    408
    Post Likes
    Thread Starter
    Post link of hoses. Haven’t seen those. Was using 1/2” hoses

  4. #4
    Join Date
    Mar 2013
    Location
    East Concord, NY
    Posts
    22,058
    Post Likes
    https://www.ferguson.com/product/nav...3c/_/R-7748782

    Im sure you could find 1/2" if you looked around
    Nest is POO!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •