Results 1 to 7 of 7

Thread: Hobart C44A need to increase wash temp.

  1. #1
    Join Date
    Aug 2015
    Location
    Elbert County, GA
    Posts
    68
    Post Likes

    Hobart C44A need to increase wash temp.

    Hey Folks,

    Does anyone know where I can get a copy of the service manual for a Hobrt C44A dishwasher or know how to adjust the wash temp. It's a 140 and I need it to be 160f. The machine has a solid state control in a little cardboard enclosed box if that helps, 12135112

    Thanks in advance,

  2. #2
    Join Date
    Aug 2002
    Location
    Southold, NY
    Posts
    35,490
    Post Likes
    Quote Originally Posted by rhkohl View Post
    Hey Folks,

    Does anyone know where I can get a copy of the service manual for a Hobrt C44A dishwasher or know how to adjust the wash temp. It's a 140 and I need it to be 160f. The machine has a solid state control in a little cardboard enclosed box if that helps, 12135112

    Thanks in advance,
    https://static-pt.com/modelManual/HO...=1532002605915

  3. #3
    Join Date
    Aug 2015
    Location
    Elbert County, GA
    Posts
    68
    Post Likes
    Thread Starter
    Thanks but this isnt a service manual, it just says this about setting the wash tank temp,

    "The tank water temperature is regulated by the solid-state thermostat. The thermostat is preset at the
    factory and no adjustment should be required. If an adjustment is necessary or the machine is to
    operate low temperature, contact your local Hobart service office. Use thermometers for verification
    of proper water temperatures"

    I need to know how to set the control from 140 to 160 on this washer.

  4. #4
    Join Date
    Jan 2010
    Posts
    26,471
    Post Likes
    So is it currently set for low temperature or has something changed that the high temperature settings is no longer accurate ?

  5. #5
    Join Date
    Aug 2002
    Location
    Southold, NY
    Posts
    35,490
    Post Likes
    Quote Originally Posted by rhkohl View Post
    Thanks but this isnt a service manual, it just says this about setting the wash tank temp,

    "The tank water temperature is regulated by the solid-state thermostat. The thermostat is preset at the
    factory and no adjustment should be required. If an adjustment is necessary or the machine is to
    operate low temperature, contact your local Hobart service office. Use thermometers for verification
    of proper water temperatures"

    I need to know how to set the control from 140 to 160 on this washer.
    Page 26 troubleshooting. Water level float not closed'
    incoming water temp too low

  6. #6
    Join Date
    Jan 2016
    Location
    The triangle in the Keystone
    Posts
    1,337
    Post Likes
    I’m not sure which temp control you have but they usually have a tiny potentiometer on them that adjusts the set point. 20 deg is kind of a lot though. I’d confirm the thermometer output while your there too. See how much the control gives you but it might need replaced.

  7. #7
    Join Date
    Aug 2015
    Location
    Elbert County, GA
    Posts
    68
    Post Likes
    Thread Starter
    I think the control is in a litte cardboard box. An I assume it's set to 140. I'll have to dig into it a bit more.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •