Results 1 to 3 of 3

Thread: Metal pool bonding

  1. #1
    Join Date
    May 2006
    Location
    Austin, Texas
    Posts
    683
    Post Likes

    Metal pool bonding

    I am not an electrician. I am alicensed HVAC contractor in Texas. My son in law is installing a 8 stock tank in his backyard as a soaking pool. He understands how to ground the pumps and various components. The question has to do with bonding. We can run a bonding wire between various metallic objects. There are references to bonding within(?) the ground for 3 around pool. How is this readily done? I can understand a buried wire mesh around the perimeter of pool, but is there a better way? Thanks for any thoughts on this matter.

  2. #2
    Join Date
    May 2006
    Location
    Austin, Texas
    Posts
    683
    Post Likes
    Thread Starter
    Well I got no responses so I will follow up. Pulled up the NEC chaptrr relating to pool bonding and found an alternate method of bonding.

  3. #3
    Join Date
    Jan 2010
    Posts
    23,443
    Post Likes
    Ground rods ?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •