-
Star flat top lp conversion
Picked up a star grill a few weeks ago. Want to get it running for the weekend on lp.
It's got teddington comsa006-pl thermostatic control valves.
All I can find for lp conversion on this is main orifices and lp regulator.
Does anyone know if I have to get anything for the valves?
Most conversions I do are either kit form or furnaces which is pretty simple
-
-
Well just finished the conversion.
Installed a 2 stage lp regulator, welded up and drilled the orifices to #52, and adjusted the pilot valves.
Unit working great. Only issue is one of the orifices is a little noisy.
I probably added a little too much weld to it.
But it's running great.
-
Post Likes - 1 Likes, 0 Dislikes
-
That is really cool.
Sent from the Okie state usin Tapatalk
"Is this before or after you fired the parts cannon at it?" - senior tech
"Is this before or after you fired the parts cannon at it?" - senior tech
I'm tired of these mediocre "semi flammable" refrigerants. If we're going to do it let's do it right.
Unless we change direction we are likely to end up where we are going.
"It's not new, it's better than new!" Maru.