-
Got Milwaukee?
So last night we pulled a 13 hour shift. Have a commercial tire shop that we needed to change the main panel on and do some major clean up. As usual my before pic's are not so great and I will be back tomorrow morning to change lights(grab after pics). But this was the setup we brought to do the work. Finished at about 4:30 this morning.
Sent from my SM-N960U using Tapatalk
-
-
Post Likes - 3 Likes, 0 Dislikes
-
I'm really happy with my stuff too. Just got their portable shop vac and it works great....
-
Post Likes - 1 Likes, 0 Dislikes
-
Got a battery charger... lol
The bible is my constitution and the constitution is my bible.
WE THE PEOPLE refers to THEM and not YOU.
Jonathan Lawson 2024
-
Post Likes - 2 Likes, 0 Dislikes
-
You need a few more batteries.
Sent from the Okie state usin Tapatalk
"Is this before or after you fired the parts cannon at it?" - senior tech
I'm tired of these mediocre "semi flammable" refrigerants. If we're going to do it let's do it right.
Unless we change direction we are likely to end up where we are going.
"It's not new, it's better than new!" Maru.
-
Post Likes - 1 Likes, 0 Dislikes
-
I don't know how you could see anything.....
Sent from my SM-G965W using Tapatalk
-
Milwaukee should be added to the list of addictive substances.
Sent from the Okie state usin Tapatalk
"Is this before or after you fired the parts cannon at it?" - senior tech
I'm tired of these mediocre "semi flammable" refrigerants. If we're going to do it let's do it right.
Unless we change direction we are likely to end up where we are going.
"It's not new, it's better than new!" Maru.
-
Post Likes - 3 Likes, 0 Dislikes
-
Originally Posted by
corny
Got a battery charger... lol
Yes.. about 10.. only went through about 20% but it was still dark in there. 20,000²ft shop stacked with tires. And we were going everywhere. They had easily 20 circuits that went nowhere hooked up and not capped. Not to mention the multibranch circuits that needed to be on 2 pole breakers.
Sent from my SM-N960U using Tapatalk
-
Originally Posted by
R600a
You need a few more batteries.
Sent from the Okie state usin Tapatalk
Our supplier has some awesome deals. Bare tool free battery. Tool that comes with 2 batteries and get a battery or two free.
Sent from my SM-N960U using Tapatalk
-
Post Likes - 1 Likes, 0 Dislikes
-
Originally Posted by
BALloyd
I don't know how you could see anything.....
Sent from my SM-G965W using Tapatalk
I honestly could have used about 8 more of the rocket(tripod) lights. What I had only light up about ⅓ of the area.
Sent from my SM-N960U using Tapatalk
-
Originally Posted by
R600a
Milwaukee should be added to the list of addictive substances.
Sent from the Okie state usin Tapatalk
I told ya bro. This was only about half of what I got. I'm an addict. Its been 1 week since my last purchase.
What a deal that was. I spent $1300 on the new super Sawzall, 18v bandsaw, hole hawg, 2 hammer drills, 12v press tool(used only a few times), 12v tubing cutter, 18v right angle drill and a 5 gal shop vac. Already sold most of the smaller stuff to my guys. My main purchase was the 12V press tool for $900. Plumbers retirement was good for both of us. Uhh I mean I'm sober and plan to be for the foreseeable future.
Sent from my SM-N960U using Tapatalk
-
Originally Posted by
Zamoramax
Our supplier has some awesome deals. Bare tool free battery. Tool that comes with 2 batteries and get a battery or two free.
Sent from my SM-N960U using Tapatalk
Can you send some my way?
Sent from the Okie state usin Tapatalk
"Is this before or after you fired the parts cannon at it?" - senior tech
I'm tired of these mediocre "semi flammable" refrigerants. If we're going to do it let's do it right.
Unless we change direction we are likely to end up where we are going.
"It's not new, it's better than new!" Maru.
-
Post Likes - 1 Likes, 0 Dislikes
-
"Is this before or after you fired the parts cannon at it?" - senior tech
I'm tired of these mediocre "semi flammable" refrigerants. If we're going to do it let's do it right.
Unless we change direction we are likely to end up where we are going.
"It's not new, it's better than new!" Maru.
-
Post Likes - 2 Likes, 0 Dislikes
-
Originally Posted by
R600a
I am starting a support group for you. It is called milwaukeehead anonymous.
We have a twelve step process, first you need to admit your addicted and then you need to send me a dozen or so tools.
Sent from the Okie state usin Tapatalk
I am definitely an addict. My garage has a good sized milwaukee banner now behind my Gadsden. I even supply my FIL with tools. I give him money for work my MIL takes it. I give him the tools he wants and he's happier than a puppy with 2 peepee's.
Sent from my SM-N960U using Tapatalk
-
Post Likes - 2 Likes, 0 Dislikes
-
Originally Posted by
Zamoramax
I am definitely an addict. My garage has a good sized milwaukee banner now behind my Gadsden. I even supply my FIL with tools. I give him money for work my MIL takes it. I give him the tools he wants and he's happier than a puppy with 2 peepee's.
Sent from my SM-N960U using Tapatalk
I can come to work in 24 hours if I start driving now. How many tools would a weeks work pay?
Sent from the Okie state usin Tapatalk
"Is this before or after you fired the parts cannon at it?" - senior tech
I'm tired of these mediocre "semi flammable" refrigerants. If we're going to do it let's do it right.
Unless we change direction we are likely to end up where we are going.
"It's not new, it's better than new!" Maru.
-
Originally Posted by
Zamoramax
So last night we pulled a 13 hour shift. Have a commercial tire shop that we needed to change the main panel on and do some major clean up. As usual my before pic's are not so great and I will be back tomorrow morning to change lights(grab after pics). But this was the setup we brought to do the work. Finished at about 4:30 this morning.
Sent from my SM-N960U using Tapatalk
I thought I was nuts.
You are certifiable!
Sent from my iPhone using Tapatalk
-
Post Likes - 2 Likes, 0 Dislikes
-
Originally Posted by
R600a
I can come to work in 24 hours if I start driving now. How many tools would a weeks work pay?
Sent from the Okie state usin Tapatalk
About $2k worth
Sent from my SM-N960U using Tapatalk
-
Post Likes - 1 Likes, 0 Dislikes
-
Originally Posted by
heatingman
I thought I was nuts.
You are certifiable!
Sent from my iPhone using Tapatalk
Yes... Yessss.
Sent from my SM-N960U using Tapatalk
-
Originally Posted by
R600a
I can come to work in 24 hours if I start driving now. How many tools would a weeks work pay?
Sent from the Okie state usin Tapatalk
I have about 1/2 of that amount, but I love them all.only buy what you will actually use.it’s easy to over buy.
I'm not young enough, to know everything...
-
Post Likes - 1 Likes, 0 Dislikes
-
Originally Posted by
dieseldude
I have about 1/2 of that amount, but I love them all.only buy what you will actually use.it’s easy to over buy.
Yeah I just finally got a hammer drill and it is so nice being able to leave the old junk corded hammer drill at home.
Sent from the Okie state usin Tapatalk
"Is this before or after you fired the parts cannon at it?" - senior tech
I'm tired of these mediocre "semi flammable" refrigerants. If we're going to do it let's do it right.
Unless we change direction we are likely to end up where we are going.
"It's not new, it's better than new!" Maru.
-
Post Likes - 1 Likes, 0 Dislikes
-
I'm guessing, you have so many tires so you can drive to where the Milwaukee sale is at
"Orange Man RAD!"
-
Post Likes - 1 Likes, 0 Dislikes