Scotsman guys , is this ok ?
Frosted hot gas pipe
Call was code 8 , so I let it run and sure enough ...it ran for 10 min and dripped thin ice ...so I cleaned ice sensor and it began making normal ice
But it looks like the HGV is leaking by
Attached Images
If it was leaking by there would be NO frost. That frost is coming from the outlet of the valve.
Post Likes - 1 Likes, 0 Dislikes
WT70 liked this post.
Attached Images
Post Likes - 1 Likes, 0 Dislikes
Originally Posted by
VTP99
Who cleaned the coil ?
That’s the cleanest Scotsman coil I think I’ve seen.
Sent from my iPhone using Tapatalk
I can't fix it if it won't stay broke..
Post Likes - 1 Likes, 0 Dislikes
Originally Posted by
BadDaddy420
That’s the cleanest Scotsman coil I think I’ve seen.
Sent from my iPhone using Tapatalk
Even after uncrating!
Post Likes - 2 Likes, 0 Dislikes
Originally Posted by
VTP99
Who cleaned the coil ?
Barbara Eden must have nodded , because Im not sure how else you could get in there
Post Likes - 1 Likes, 0 Dislikes
Originally Posted by
pecmsg
If it was leaking by there would be NO frost. That frost is coming from the outlet of the valve.
YUP
Originally Posted by
BadDaddy420
That’s the cleanest Scotsman coil I think I’ve seen.
Sent from my iPhone using Tapatalk
Yeah they usually look like the rest of that machine.
Right up there with the stupidest design ever. 😏
Post Likes - 1 Likes, 0 Dislikes
WT70 liked this post.
Originally Posted by
pecmsg
If it was leaking by there would be NO frost. That frost is coming from the outlet of the valve.
Ok now im off work ....
Why do you suppose frost is forming on that line ?
Its in ICE mode about 15 min in
Originally Posted by
Snapperhead
Ok now im off work ....
Why do you suppose frost is forming on that line ?
Its in ICE mode about 15 min in
Conduction.
If it was leaking buy it wouldn’t frost. Hot gas on the other side of the valve not Liquid!
Time to hit that cleaning cycle
I absolutely Hate cleaning them
Its so boring
I like cleaning Ice Machines. Nice easy job ( that takes quite a bit of time) . I work for a hospital so I can take the time to do it right. In the field it it hard to get paid to do a correct cleaning ( too much time) . The issue I end up with is going behind a guy that did not do it right and the ice sensors ( like the manitowic) are so bad that by the time you get them cleaned right they end up early harvesting on you. It a issues on them anyway, but more so if it is in very dirty/bad shape.