Edison Plug ok for 110v Quick Disconnect Box rather than wiring to panel?

[ardpub]

Hi there,

I'm looking to DIY install a 12k BTU MrCool mini split unit (115v DIY model). Local HVAC/electrical code basically says no permits are needed if its a "plug-in" appliance. I have ample 110 outlets on 20amp breakers in the area (and also one 220). Rather than wiring box with quick disconnect, surge protector and GFCI directly to panel, would there be any reason not to simply wire it to a edison plug with ground and just plug it in to an existing outlet to avoid code violations or pulling permits?

Cant post links but this is the model number at Homedepot.com:
DIY-12-HP-115AE

[ammoniadog]

Code prohibits adding plugs to most things that are permanently installed.

If I remember correctly there are exemptions for a dishwasher and garbage disposal, but not much else.

[billygoat22]

only appliances under 1/2 hp can have a plug as disconnect.

the only edison thing Ive heard of is an edison screw in fuse, or light bulb socket (medium base).