Hobart LXEH display and power issues

[cbmarshall]

Hobart LXEH dishwasher ML 130192. Display failed-- all LEDs on the display were on at once-- and we replaced. Unit now not powering on without power disconnect/reconnect and even that sometimes doesn't work. Suspect control board but would like some confirmation. Thanks!

[Dakota11]

Hobart LXEH dishwasher ML 130192. Display failed-- all LEDs on the display were on at once-- and we replaced. Unit now not powering on without power disconnect/reconnect and even that sometimes doesn't work. Suspect control board but would like some confirmation. Thanks!

You first should be looking at the power supply board as it provides power to control board ......check every wire connection, fuses ........you replaced the display go back and recheck everything there to and then re post and we will go from there.

[cbmarshall]

All connections are correct, fuses, breaker, all in working order. Of note, the replacement display showed the same problem shortly after install-- all LEDs lit, prior to the unit eventually developing the power problems I mentioned above.

[Dakota11]

All connections are correct, fuses, breaker, all in working order. Of note, the replacement display showed the same problem shortly after install-- all LEDs lit, prior to the unit eventually developing the power problems I mentioned above.

sounds like a control board issue then.......just to confirm you replaced the front display as in the on /off overlay or membrane right ? not the actually L.E.D screen .....

[Tommy Brackett]

Partstown Hobart web site has what you need

[Tommy Brackett]

partstown com hobart lxeh manuals

[ECtofix]

partstown com hobart lxeh manuals