Results 1 to 2 of 2

Thread: Cogeneration Exhaust

  1. #1
    Join Date
    May 2013
    Post Likes

    Arrow Cogeneration Exhaust

    Hi all!! I need to know which are the proper products (duct materials, rounded or squared duct) by which a 504 F gas combustion flow can be ducted to the exterior of a building!!! please advice.

  2. #2
    Join Date
    Nov 2004
    Anchorage Alaska / Seattle WA
    Post Likes
    Consult your nearest mechanical contractor and tell him you need an exhaust "thimble" - he will want to know the thickness of the wall - the diameter of the exhaust etc. I have installed dozens of exhaust pipes for diesel and gas turbines through walls. If you are in a permitted area you should run the design you will receive from the mechanical contractor past your permitting department for pre-approval... (will probably be the fire marshal) be aware that there are some restrictions in the building code about how high you have to go with exhaust above the roof etc.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts