Hobart AM15 dishwasher help

[marter]

Got to a store, dishwasher not coming on. Dont ya know now one at the store knows what happened when it quit. Was getting 12v to the control board but not coming on.. Got a new board from Hobart and put it in.. turned on display says "Fill" but its not energizing the solenoid in the water line.

This is only the 2nd dishwasher ive ever worked on, so im pretty much lost. Any help here would be great

[chrldwlf]

did you program the board for AM select per the instructions included in the board?

[marter]

did you program the board for AM select per the instructions included in the board?

instructions

[chrldwlf]

Sigh.....That board will run both the LXi and the AM select and has to be programmed correctly....I will see if I have programming instructions tomorrow

[marter]

no worries i got it

on another note, what is involved in replaced the pump to tank gasket. Ive got a gasket on order for a systems thats leaking bad, just looking for a heads up

[chrldwlf]

lefty loosy, righty tighty.....easy money

[Wdunlap89]

Do you have the programming instructions?

[ECtofix]

Do you have the programming instructions?

I finally accessed this after a three month furlough due to COVID. It's all three pages.

FWIW: This is also included in the box containing each new control board (part number 00-892932-00002), so...it's NOT a secret: