Results 1 to 4 of 4
  1. #1
    Join Date
    Nov 2004
    Posts
    25
    Post Likes
    Taylor soft serve machine. M# 162-27 S# j5053112
    Left side comes out liquid about/12 oz. before compressor will come on and then freezes everything ok. Everything works just fine until you let unit sit for a while than it does same thing. could standby stat be bad or acting up. and ideas would be helpful as i never worked on this style unit. I'm more familiar with large production scale ammonia ice cream machines.

  2. #2
    Join Date
    Mar 2001
    Posts
    119
    Post Likes
    there's a small timer on each side-square relay about 2x2
    check that

    b.

  3. #3
    Join Date
    Aug 2002
    Posts
    6,047
    Post Likes
    Welcome, nh3.... but I have news for you ... R-12 actually RULES!!!







    Good to have you aboard.

  4. #4
    Join Date
    Mar 2004
    Location
    Connecticut
    Posts
    34
    Post Likes
    standby t-stat is only used in standby. Check off cycle timer. When handle is NOT pulled it will cycle unit every 14 min. There should be no compressor delay when handle is pulled.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Related Forums

Plumbing Talks | Contractor MagazineThe place where Electrical professionals meet.