low Psi...

[primmers]

This is the regulator I use to blow out coils with CO2, seems to be putting out a lower than usual
Amount of wind, yes I’m using a new bottle..any thoughts on a adjustment?/ there’s a knurled
End and a big hex fitting..I can’t see how it would be adjustable

Thoughts

[rickl]

We connect directly to the co2 bottle. No regulator needed.


Sent from my iPhone using Tapatalk

[pecmsg]

It should be stamped in the body the outlet pressure

[primmers]

Nothing

[pecmsg]

Does the end with the small hole unscrew? There may be a stamp on the cartridge inside there.

[dieseldude]

If the knurled end is all the way in, clock wise, and still no pressure. it is time for a rebuild or replace.