N4 Point NamesWiresheet vs. Database

[techservices]

Lon XIO devices
The names of various points were changed in the points list below Each XIO module
in the Nav sidebar

Points can still be viewed , edited and Overriden
Do the point Names in The program wiresheets have to also Match the Point names
below each XIO Module?
Example
XIO-DO4-DO#1
Points
South_Fan1_Cmd
The wire sheet Has the Binary Point Called
"SRar_Fan1_Cmd"
This is the Final point being commanded
Cannot determine if the Wiresheet Point is D0-1 also
Do the names have to match, providing both are referencing D0-1 ?

[lwarren]

Just guessing here, SRar_Fan1_Cmd is probably a niagara point. If you go to the property sheet of the points in question, niagara points will have a null proxy ext. Your actually Lon proxy points will have a Target slot in the proxy ext that defines the snvt name.

[techservices]

Took a couple of extra minutes.
Wiresheet name changes automatically when name in same points folder changes