+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 20 of 23

Thread: Chilled coveralls for attic work!

  1. #1
    Join Date
    Jan 2019
    Location
    Oklahoma
    Posts
    41
    Post Likes

    Chilled coveralls for attic work!

    I was thinking ice water, bird fountain pump, 18vdc-4ah battery, thermos(es), tubing glued to the inside of a pair or coveralls with a tube and tube heat exchange refrigeration circuit, such as the coo supply water meets the warm return water, keeping temperatures even.
    Upgrades include dry ice/alcohol sourced cooling, with alcohol/water refrigerant.
    Condensation?
    Mylar layer for outdoors?
    Let me know what you think, I'm trying it on the cheap. Have half of it already.

  2. Likes Mars65 liked this post.
  3. #2
    Join Date
    Dec 2006
    Location
    Vancouver, B.C.
    Posts
    1,731
    Post Likes

    Chilled coveralls for attic work!

    Quote Originally Posted by LandFish View Post
    I was thinking ice water, bird fountain pump, 18vdc-4ah battery, thermos(es), tubing glued to the inside of a pair or coveralls with a tube and tube heat exchange refrigeration circuit, such as the coo supply water meets the warm return water, keeping temperatures even.
    Upgrades include dry ice/alcohol
    sourced cooling,...

    I feel like alcohol has already been introduced...



    Sent from my iPhone using Tapatalk
    Quickly, I must hurry, for there go my people and I am their leader!

  4. Likes BBeerme, ga-hvac-tech, VTP99 liked this post.
  5. #3
    Join Date
    May 2014
    Location
    Bay Area California
    Posts
    43,458
    Post Likes
    Just get a 'mining suit'. Read about them decades ago. High pressure compressed air. Just the change from high pressure to low pressure creates the refrigeration effect, with no change of state. Read about them decades ago.
    I do a triple evac with nitro to remove non condensables.

  6. Likes LandFish, ga-hvac-tech liked this post.
  7. #4
    Join Date
    Dec 2006
    Location
    Vancouver, B.C.
    Posts
    1,731
    Post Likes
    Honestly though, I’m having a hard time visualizing what you are describing. Why the tube in tube HX? I’m sure it would make more sense to me if you had a chicken scratch drawing to aid this discription, nothing fancy is necessary, just a scribble with your thoughts.

    When they came out with the electric heated jackets the first thought I had was “does it cool also? The counter guy laughed at me and said no, it’s not a heat pump! I was honestly wondering if they used Peltier plates in the jacket. I’m guessing because it’s a major corporation they were just looking for a quick buck in a simple idea and didn’t want to tackle the inefficiency and complaints of low operational run times that would most likely coincide with peltier plates. I haven’t run the numbers to see how long it would work for but it may be something to consider also. Batteries are relatively cheep and I’m sure you can buy the plates in bulk off Mouser for pretty cheep.


    Sent from my iPhone using Tapatalk
    Quickly, I must hurry, for there go my people and I am their leader!

  8. #5
    Join Date
    Dec 2006
    Location
    Vancouver, B.C.
    Posts
    1,731
    Post Likes
    Quote Originally Posted by BBeerme View Post
    Just get a 'mining suit'. Read about them decades ago. High pressure compressed air. Just the change from high pressure to low pressure creates the refrigeration effect, with no change of state. Read about them decades ago.
    Well that does seem like a pretty cheep option also.

    I gotta admit, whenever I go into an attic I always wonder how I can take LESS stuff up there with me, these suits and hoses and bottles seem like a bulky addition... I guess all great ideas start in the design stage then get refined to perfection after prototype has been confirmed successful.


    Sent from my iPhone using Tapatalk
    Quickly, I must hurry, for there go my people and I am their leader!

  9. #6
    Join Date
    Dec 2006
    Location
    Vancouver, B.C.
    Posts
    1,731
    Post Likes
    Dry ice and thermoses....

    I’ve put dry ice into pop bottles before, I would never strap that to my back though

    https://youtu.be/nZHGK37jBp8


    Sent from my iPhone using Tapatalk
    Quickly, I must hurry, for there go my people and I am their leader!

  10. Likes LandFish, doc havoc liked this post.
  11. #7
    Join Date
    Jan 2012
    Location
    Broomall, PA
    Posts
    4,744
    Post Likes
    Send the helper...?
    If I do a job in 30 minutes it's because I spent 30 years learning how to do that in 30 minutes. You owe me for the years, not the minutes.

    Helpful Calcs, tips, tricks on my YouTube channel: https://www.youtube.com/channel/UCgm...TUTAdKmqRiTDEg

  12. Likes Artietech liked this post.
  13. #8
    Join Date
    Jan 2019
    Location
    Oklahoma
    Posts
    41
    Post Likes
    Thread Starter
    Quote Originally Posted by thatguy View Post
    Dry ice and thermoses....

    I’ve put dry ice into pop bottles before, I would never strap that to my back though

    https://youtu.be/nZHGK37jBp8


    Sent from my iPhone using Tapatalk
    that thought had first occurred to me so, use a low temp/ alcohol capable pump. sublimate the dry ice in 100% rubbing alcohol (freezing point ~ -30f). All the CO2 is dispersed before hand and only ultra-low temp fluid is left. In turn the tubing size can be smaller.
    Think of higher voltage, less weight. More force amperage would be required.
    The prototype is a "simpler" version compatible with readily accessible ice machine at work. I figure it could keep a person pretty cool for a our or so with a gallon of ice in a 'cooler backpack.' Plus+ it holds colddrinks .

  14. #9
    Join Date
    May 2014
    Location
    Bay Area California
    Posts
    43,458
    Post Likes
    Be a real drag if the CO2 displaced too much oxygen, and you never make it out of an attic.
    I do a triple evac with nitro to remove non condensables.

  15. #10
    Join Date
    Aug 2002
    Location
    Southold, NY
    Posts
    47,749
    Post Likes
    There already on the market.

    I wont use them......over 90° send someone else!

  16. Likes BBeerme, stanbyyourword, kdang liked this post.
  17. #11
    Join Date
    Nov 2006
    Location
    NW Florida
    Posts
    711
    Post Likes
    Instead of a thermos why not a Camelbak backpack?

    Then again, the extra weight you're carrying may offset the relief you might feel trying to stay cool.

    Just a thought and a penny in the pot.

  18. #12
    Join Date
    Jul 2020
    Posts
    13
    Post Likes
    I personally love when itÂ’s 130+ in an attic

  19. #13
    Join Date
    Aug 2020
    Location
    Pleasure Island
    Posts
    3
    Post Likes
    I think The Gimp was wearing one in Pulp Fiction :0

  20. #14
    Join Date
    Jul 2001
    Location
    South Carolina
    Posts
    9
    Post Likes
    This is a great way to get Alcohol on the job. I like Captain Morgan personally

  21. #15
    Join Date
    Sep 2020
    Posts
    9
    Post Likes
    Quote Originally Posted by edtheheaterman View Post
    This is a great way to get Alcohol on the job. I like Captain Morgan personally
    I did not understand, but what did you write about Captain Morgan?

  22. #16
    Join Date
    Nov 2020
    Posts
    5
    Post Likes
    To use a Mylar blanket or sleeping bag properly: squat, then
    wrap it around you! This will
    minimize the cold you will feel from the ground. While a Mylar
    blanket can be good as a ground covering, it has no insulation
    on its own, and this could even make you even more cold in an
    extreme survival situation.

    Also, If you're not SURE you don't need protection from insulation, get a suit. The constant itching and rash for 1-5 days afterward and potentially ruined clothing is way worse than the discomfort and small expenditure upfront.

  23. #17
    Join Date
    Jul 2010
    Location
    US of A
    Posts
    6,346
    Post Likes
    I tried wearing Coolmax t shirts and I thought I was going to die. I wouldn't waste the money or try them.

  24. #18
    Join Date
    Aug 2020
    Posts
    15
    Post Likes
    Quote Originally Posted by JoeyMarquez View Post
    To use a Mylar blanket or sleeping bag properly: squat, then
    wrap it around you! This will
    minimize the cold you will feel from the ground. While a Mylar
    blanket can be good as a ground covering, it has no insulation
    on its own, and this could even make you even more cold in an
    extreme survival situation.

    Also, If you're not SURE you don't need protection from insulation, get a suit. The constant itching and rash for 1-5 days afterward and potentially ruined clothing is way worse than the discomfort and small expenditure upfront.
    It seems to me that these are very complex actions.

  25. #19
    Join Date
    May 2008
    Location
    New Mexico
    Posts
    36
    Post Likes
    Try a cooling vest.

  26. #20
    Join Date
    May 2014
    Location
    Bay Area California
    Posts
    43,458
    Post Likes
    I'm thinkin' a scantily clad young woman with a spray bottle full of water and full attention on me would be much more enjoyable than a cooling vest.
    I do a triple evac with nitro to remove non condensables.

+ Reply to Thread
Page 1 of 2 12 LastLast

Quick Reply Quick Reply

Register Now

Please enter the name by which you would like to log-in and be known on this site.

Please enter a password for your user account. Note that passwords are case-sensitive.

Please enter a valid email address for yourself.

Log-in

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •