Results 1 to 3 of 3

Thread: Ecobee setup

  1. #1
    Join Date
    Aug 2008
    Posts
    2
    Post Likes

    Ecobee setup

    I have a baseboard style heat-only system with a Argo ARM842DP control with 4 zones. I have only two wires running to my thermostats, with a third unused green wire. Can I hook up the green wire to the common terminal on the board to connect a EcoBee thermostat, using the green wire as a c-wire? If so, how many thermostats, can I run from the common terminal?
    Thank You

  2. #2
    Join Date
    Jun 2003
    Location
    Texas
    Posts
    1,478
    Post Likes
    yes

  3. #3
    Join Date
    Aug 2008
    Posts
    2
    Post Likes
    Thread Starter
    Quote Originally Posted by poppa View Post
    yes
    Thanks, would I be able to use the common terminal for more than one thermostat?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •