Results 1 to 8 of 8
  1. #1
    Join Date
    Aug 2019
    Posts
    19
    Post Likes

    Ice machine indico

    Evap coil is only making ice on the bottom half

  2. #2
    Join Date
    Jan 2010
    Posts
    17,323
    Post Likes
    Gonna need more information than that.

  3. #3
    Join Date
    Aug 2002
    Location
    Southold, NY
    Posts
    24,326
    Post Likes
    Quote Originally Posted by Lopez686joel View Post
    Evap coil is only making ice on the bottom half
    Ok
    So what would cause that.

    Your profile says tech.

  4. #4
    Join Date
    Jul 2010
    Location
    So-Cal
    Posts
    630
    Post Likes
    Its probably set for half sheet. Flip the switch for full sheet.

  5. Likes UmmScott liked this post
  6. #5
    Join Date
    Aug 2019
    Posts
    19
    Post Likes
    Thread Starter
    Quote Originally Posted by pecmsg View Post
    Ok
    So what would cause that.

    Your profile says tech.
    Low refrigerant level % I was not thinking it could be on low r when i put my gauges i was thinking wrong I was using my pressure like I was working on a freezer because my low pressure was 25psi and high 200 on a icecream shop so question what should I reading after I weigh my 20 0z ?

  7. #6
    Join Date
    Feb 2016
    Location
    N'awlins!
    Posts
    152
    Post Likes
    Start off with giving the model and serial # information.
    Next google that and look for technician service manual.

    Factory tech service manual will give a wealth of needed data from pressures, to tables estimating freeze times based on ambient air and water temperatures.

  8. #7
    Join Date
    Dec 2014
    Posts
    2,840
    Post Likes
    Quote Originally Posted by jackintheboxtec View Post
    Its probably set for half sheet. Flip the switch for full sheet.
    Hahaha! Great line!


    Sent from my SM-G950U using Tapatalk

  9. #8
    Join Date
    Aug 2019
    Posts
    19
    Post Likes
    Thread Starter
    Now it's more problem . fix a leak on the return line of the evap the trap made a crack where the txv goes .weight charge every thing was good for a couple batches. But the water stop coming out and filling the pan .I check the probe it's good but on 7 min the water is empty it doesn't fill no more

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •