Results 1 to 4 of 4
  1. #1
    Join Date
    Jun 2005
    Location
    St Petersburg, Florida
    Posts
    113
    Post Likes

    synchronous belt and sprocket conversion on air handler

    Recently I was tasked with helping on a weekend for a supposed sheave change that turned out to be a whole lot more. Being as the intended outcome is energy savings is why I post here.
    On an 18 year old 5) C V belt sheaves and belt drive with VFD drive. The sprockets supplied to us had no flange and no tensioners existed to retain the belt, and the motor carriage has only one bolt for adjustment with four cornered retainment bolts on the motor.
    Yippee. We had no laser and the system hasn't been accurately balanced in years and I couldn't get the belt not to walk off the sprocket. I failed and can not see this working without superb balancing and dead accurate alignment.
    The smart guys came Sunday with lasers and got it to stay somewhat. Monday they adjusted down to the 5/1000th according to the tech I helped and still it will not ride comfortably centered and not change in a few hours.
    Anyone else been doing these?

  2. #2
    Join Date
    Dec 2006
    Location
    Vancouver, B.C.
    Posts
    665
    Post Likes
    I doubt I would have any experience to input anything helpful but would like to see pictures if you got them.


    Sent from my iPhone using Tapatalk
    Quickly, I must hurry, for there go my people and I am their leader!

  3. #3
    Join Date
    Nov 2004
    Location
    up in the hizzy
    Posts
    3,358
    Post Likes
    A salesman from Trane showed up in our account and try to talk our customer to convert their AHU to synchronous belts promising all sort of energy savings, the AHU's already have VFD's and cogged belts, we told the client to challenge Trane to produce any evidence of savings and 3 local references, they did not hear from Trane again.
    There is not better place for the working men than the union! 100% UA the only HVAC union!

  4. #4
    Join Date
    Apr 2003
    Location
    St. Louis
    Posts
    1,255
    Post Likes
    Heres a link to abb just scroll down to literature HT500 drive system. Supposed to be 98% efficient. Something has to be moving like motor or blower bearings have excessive play. Base of the motor blower not stiff enough flexing. Never played with this drive system.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •