Results 1 to 2 of 2
  1. #1
    Join Date
    Jun 2008
    Location
    Canada
    Posts
    152
    Post Likes

    Flexible vent question

    I just did my own fireplace (licensed gas fitter, first fireplace Ive done). I noticed after install that I installed the venting with the assumption that the manufacturers label would be attached to the venting in the same orientation as the lettering stamped into venting. I dont recall seeing anything specifying direction, but the stamped flexible vent writing is upside down as it leaves the fireplace. I know other liners Ive used specified a certain end up. Is this an issue for fireplace install? It was Ecco brand venting I believe (4/7)

  2. #2
    Join Date
    Jun 2008
    Location
    Canada
    Posts
    152
    Post Likes
    Thread Starter
    I asked the powers that be, orientation doesnt matter. Delete thread!?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •