Results 1 to 7 of 7
  1. #1
    Join Date
    Jun 2019
    Posts
    21
    Post Likes

    BQL Query in a NumericPoint

    Hello,

    I did a BQL Query on a meter to obtain the consumption on the month. I would like to know if it's possible to put the value that I obtain on a NumericPoint to exploit it, and if it's possible, how can I do it ?

    Thanks

  2. #2
    Join Date
    Jul 2005
    Location
    Wisconsin
    Posts
    171
    Post Likes
    There is a History Analysis block (maybe AX Community or VykonPro) that allows you to link the data directly out of the block.

  3. #3
    Join Date
    Jun 2019
    Posts
    21
    Post Likes
    Thread Starter
    I found a zip file where there are VykonPro modules. Do I need a licence or something else to use them ?

  4. #4
    Join Date
    Nov 2012
    Location
    Canada
    Posts
    189
    Post Likes
    Yes it's full open

  5. #5
    Join Date
    Jun 2019
    Posts
    21
    Post Likes
    Thread Starter
    Thanks it works !

    For some history data meter, the VykonPro module "cannot resolve history". Do you know why ?

  6. #6
    Join Date
    Jul 2005
    Location
    Wisconsin
    Posts
    171
    Post Likes
    You need to have the VykonProService in your services...make sure you have it there....one thing to note, not recommended to run that object on a JACE (one might be fine...multiple can crash it). Then you need to place the component inside of the point you want to run it on (it is a child like a history or alarm extension)

  7. #7
    Join Date
    Jun 2019
    Posts
    21
    Post Likes
    Thread Starter
    I found my problem, my points and history points didn't have the same name

    But thanks for your help

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •