Results 1 to 12 of 12
  1. #1
    Join Date
    May 2019
    Posts
    6
    Post Likes

    Lead Installer Needed - West Chester, PA (Outside Philadelphia)

    I'm looking for a professional installer that can help with our Wesley Wood location in West Chester, PA just outside of Philadelpia.

    As a member of our team, you will install heating, air conditioning, ventilation and refrigeration equipment as well as accessories.

    • Reports any unsafe acts, conditions and hazards to direct supervisor/manager immediately.
    • Reports any contravention of legislation or company policy, procedure or program to direct supervisor/manager immediately.
    • Corrects substandard acts or conditions within area of control.
    • Uses and maintains appropriate personal protective equipment (PPE) as prescribed by company program(s) or procedure(s)
    • Never removes or renders ineffective any safety guards, devices, or clothing prescribed to be in place or worn.
    • Complies with the general rules as prescribed by company program(s) procedure(s)
    • Operates devises or equipment as prescribed by company program(s) or procedure(s)
    • Participates in any safety initiatives, teams, or committees.
    • Reports all injuries or incidents as prescribed by company program(s) or procedure(s) immediately.
    • Provides input on developing safety initiatives and plans to eliminate exposures that could cause accidents.
    • Does not perform acts that may endanger the safety or well-being of others
    • Does not engage in any pranks, contests, or rough boisterous behavior.
    • Works in compliance with applicable legislative requirement.


    0-5 years’ residential install experience is needed with a strong focus on customer service and a commitment to integrity.

    The qualified candidate must have a high school diploma or equivalent, good communication skills, and mechanical aptitude. Team work is a priority and installers must be willing to work with and assist co-workers as needed, in addition to working overtime, night, and weekend hours.

    Name:  Wesley Wood Logo.JPG
Views: 201
Size:  17.3 KB

  2. #2
    Join Date
    Dec 2009
    Location
    maroon lazyboy
    Posts
    2,664
    Post Likes
    0-5 years for lead installer?

  3. #3
    Join Date
    May 2019
    Posts
    6
    Post Likes
    Thread Starter
    It was a typo - copied from a "install helper" requisite.

    3-8 years experience as a team leader should've been there.

  4. #4
    Join Date
    Dec 2009
    Location
    maroon lazyboy
    Posts
    2,664
    Post Likes
    Quote Originally Posted by JFP02 View Post
    It was a typo - copied from a "install helper" requisite.

    3-8 years experience as a team leader should've been there.
    Sure thing, good luck with your summer!

  5. #5
    Join Date
    May 2014
    Location
    Bay Area California
    Posts
    23,581
    Post Likes
    So, the pay is in the $40 - $60 per hour range?

    You're looking for a lead that can run the show and watch your back?
    If you were a real tech, you'd solder a relay on that board and call it good to go.

    I do a triple evac with nitro to remove non condensables.

    I use 56% silver on everything except steel.

    Did you really need the " If you were a real tech " ??

  6. #6
    Join Date
    May 2019
    Posts
    6
    Post Likes
    Thread Starter
    I can say, I'll pay for experience.

  7. #7
    Join Date
    May 2014
    Location
    Bay Area California
    Posts
    23,581
    Post Likes
    $17.50 per hour?
    If you were a real tech, you'd solder a relay on that board and call it good to go.

    I do a triple evac with nitro to remove non condensables.

    I use 56% silver on everything except steel.

    Did you really need the " If you were a real tech " ??

  8. #8
    Join Date
    May 2019
    Posts
    6
    Post Likes
    Thread Starter
    HAHA no. You coming in for an interview?

  9. #9
    Join Date
    May 2014
    Location
    Bay Area California
    Posts
    23,581
    Post Likes
    Can't imagine you could make it worth my while.

    Not trying to insult you, just saying I'm pretty settled in where I am.


    Quote Originally Posted by JFP02 View Post
    HAHA no. You coming in for an interview?
    If you were a real tech, you'd solder a relay on that board and call it good to go.

    I do a triple evac with nitro to remove non condensables.

    I use 56% silver on everything except steel.

    Did you really need the " If you were a real tech " ??

  10. #10
    Join Date
    Nov 2006
    Location
    Southeastern Pa
    Posts
    31,093
    Post Likes
    I remember the old Wesley Wood.

    I think that's all I'll say.
    [Avatar photo from a Florida training accident. Everyone walked away.]
    2 Tim 3:16-17

    RSES CMS, HVAC Electrical Specialist
    Member, IAEI

    AOP Forum Rules:







  11. #11
    Join Date
    May 2019
    Posts
    6
    Post Likes
    Thread Starter
    This is a NEW Wesley Wood... "Making Wesley Wood Great Again" HAHA

  12. #12
    Join Date
    Feb 2013
    Posts
    8
    Post Likes
    Holy shit the trolls are out, let Wesley Wood solicit their shit in peace! If commenters are "good" and interested in making over 100k a years after pension, 401K, healthcare and dental DM me

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •