Page 1 of 2 12 LastLast
Results 1 to 13 of 15
  1. #1
    Join Date
    Apr 2019
    Posts
    6
    Post Likes

    Honeywell WEBS jar files

    Does anyone have the AX 3.8 and N4.4 jar files for the Spyder modules?

    I'm trying to set up a migration dry run of an existing station on my bench setup but I can't find the jar's I need (or the dependencies - datasharing(3.0)/genericUIframework).

    I'm using a non WEBs licensed Workbench (open/open). Ultimately it doesn't matter if the Spyder programming functionality works after the conversion. Field controllers will be replaced with something better should the need arise. I DO need the bog to come through intact without stripping components due to missing modules. And of course I need the station to load in my bench AX JACE to begin with.

    I'm being prompted for:
    honeywellLonSpyder
    honeywellSpyderTool
    honeywellVenomTools

    Even trying to request access to Honeywell extranet seems to be broken, so I would be sincerely grateful if someone could help me out here.

    My email should be in my profile if I set it up correctly. I can provide a FTP folder share (email server does NOT like jar files).

    I've never had such a hard time finding modules.

    Thanks!

  2. #2
    Join Date
    Jan 2003
    Location
    USA
    Posts
    4,979
    Post Likes
    Quote Originally Posted by Rauth View Post
    Does anyone have the AX 3.8 and N4.4 jar files for the Spyder modules?
    Don't think your email shows up to anyone. You cannot PM either since you have no posts.

    Quote Originally Posted by Rauth View Post
    Field controllers will be replaced with something better should the need arise.
    The sun coming up tomorrow is reason enough IMO.
    Propagating the formula. http://www.noagendashow.com/

  3. #3
    Join Date
    Apr 2019
    Posts
    6
    Post Likes
    Thread Starter
    Quote Originally Posted by orion242 View Post
    Don't think your email shows up to anyone. You cannot PM either since you have no posts.



    The sun coming up tomorrow is reason enough IMO.
    Oh the joys of being a forum newbie. I thought I set it up correctly. Added email to profile (thought it was there already). Perhaps now it shows up?

    I concur with your opinion on getting rid of the Spyders. Unfortunately I'm constrained by scope to just working the Niagara side of things for the moment. This exercise is part of that due diligence process.

  4. #4
    Join Date
    May 2019
    Location
    Calgary, Alberta
    Posts
    1
    Post Likes
    Hi Folks in this thread,
    I am in a similar situation to you.
    Can you help me out?
    Much appreciated!!

  5. #5
    Join Date
    Oct 2013
    Posts
    389
    Post Likes
    Quote Originally Posted by SteveW108 View Post
    Hi Folks in this thread,
    I am in a similar situation to you.
    Can you help me out?
    Much appreciated!!
    You've got mail.

  6. #6
    Join Date
    Aug 2013
    Posts
    2
    Post Likes

    In need of Honeywell WEBs-N4 modules.

    Quote Originally Posted by Rauth View Post
    Does anyone have the AX 3.8 and N4.4 jar files for the Spyder modules?

    I'm trying to set up a migration dry run of an existing station on my bench setup but I can't find the jar's I need (or the dependencies - datasharing(3.0)/genericUIframework).

    I'm using a non WEBs licensed Workbench (open/open). Ultimately it doesn't matter if the Spyder programming functionality works after the conversion. Field controllers will be replaced with something better should the need arise. I DO need the bog to come through intact without stripping components due to missing modules. And of course I need the station to load in my bench AX JACE to begin with.

    I'm being prompted for:
    honeywellLonSpyder
    honeywellSpyderTool
    honeywellVenomTools

    Even trying to request access to Honeywell extranet seems to be broken, so I would be sincerely grateful if someone could help me out here.

    My email should be in my profile if I set it up correctly. I can provide a FTP folder share (email server does NOT like jar files).

    I've never had such a hard time finding modules.

    Thanks!
    I'm currently working on an AX to N4 migration, but I do not have access to the Honeywell modules. Will someone please email them to me? 4.6.96.28 preferably. Thanks in advance!

    tlambert@engineeredcooling.com or troyofomp@yahoo.com

  7. #7
    Join Date
    Nov 2019
    Location
    Springfield, Missouri
    Posts
    2
    Post Likes
    Hey guys, I am trying to launch a 3.7.106 Niagara station on my local workbench and need the honeywelllonspyder.jar file and any other honeywell jar files you may have. Please help if you can.

    Thanks!

  8. #8
    Join Date
    Oct 2013
    Posts
    389
    Post Likes
    Quote Originally Posted by zaltis View Post
    Hey guys, I am trying to launch a 3.7.106 Niagara station on my local workbench and need the honeywelllonspyder.jar file and any other honeywell jar files you may have. Please help if you can.

    Thanks!
    You might want to put your email address in your profile if you want anyone to send you over the files.

  9. #9
    Join Date
    Nov 2019
    Location
    Springfield, Missouri
    Posts
    2
    Post Likes
    Solved - Thanks for everyone who helped me out on this. The jar files were needed, in addition to a spyderlonbacnet installer application. Basically the application loads the jar files into whatever version of AX you want, otherwise the jar files won't load and your station will fail.

  10. #10
    Join Date
    Mar 2008
    Location
    Chicago, IL
    Posts
    90
    Post Likes
    One more here that could use those files. I've uploaded from the JACE, but it's not enough. :-) Thanks!

  11. #11
    Join Date
    Oct 2013
    Posts
    389
    Post Likes
    Quote Originally Posted by jgraham View Post
    One more here that could use those files. I've uploaded from the JACE, but it's not enough. :-) Thanks!
    AX or N4?

  12. #12
    Join Date
    Mar 2008
    Location
    Chicago, IL
    Posts
    90
    Post Likes
    N4

  13. #13
    Join Date
    Oct 2013
    Posts
    389
    Post Likes
    Quote Originally Posted by jgraham View Post
    N4
    You've got mail!

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •