Honeywell WEBS jar files

[Rauth]

Does anyone have the AX 3.8 and N4.4 jar files for the Spyder modules?

I'm trying to set up a migration dry run of an existing station on my bench setup but I can't find the jar's I need (or the dependencies - datasharing(3.0)/genericUIframework).

I'm using a non WEBs licensed Workbench (open/open). Ultimately it doesn't matter if the Spyder programming functionality works after the conversion. Field controllers will be replaced with something better should the need arise. I DO need the bog to come through intact without stripping components due to missing modules. And of course I need the station to load in my bench AX JACE to begin with.

I'm being prompted for:
honeywellLonSpyder
honeywellSpyderTool
honeywellVenomTools

Even trying to request access to Honeywell extranet seems to be broken, so I would be sincerely grateful if someone could help me out here.

My email should be in my profile if I set it up correctly. I can provide a FTP folder share (email server does NOT like jar files).

I've never had such a hard time finding modules.

Thanks!

[orion242]

Does anyone have the AX 3.8 and N4.4 jar files for the Spyder modules?

Don't think your email shows up to anyone. You cannot PM either since you have no posts.

Field controllers will be replaced with something better should the need arise.

The sun coming up tomorrow is reason enough IMO.

[Rauth]

Don't think your email shows up to anyone. You cannot PM either since you have no posts.



The sun coming up tomorrow is reason enough IMO.

Oh the joys of being a forum newbie. I thought I set it up correctly. Added email to profile (thought it was there already). Perhaps now it shows up?

I concur with your opinion on getting rid of the Spyders. Unfortunately I'm constrained by scope to just working the Niagara side of things for the moment. This exercise is part of that due diligence process.

[SteveW108]

Hi Folks in this thread,
I am in a similar situation to you.
Can you help me out?
Much appreciated!!

[Reckles]

Hi Folks in this thread,
I am in a similar situation to you.
Can you help me out?
Much appreciated!!

You've got mail.

[Tlamb824]

Does anyone have the AX 3.8 and N4.4 jar files for the Spyder modules?

I'm trying to set up a migration dry run of an existing station on my bench setup but I can't find the jar's I need (or the dependencies - datasharing(3.0)/genericUIframework).

I'm using a non WEBs licensed Workbench (open/open). Ultimately it doesn't matter if the Spyder programming functionality works after the conversion. Field controllers will be replaced with something better should the need arise. I DO need the bog to come through intact without stripping components due to missing modules. And of course I need the station to load in my bench AX JACE to begin with.

I'm being prompted for:
honeywellLonSpyder
honeywellSpyderTool
honeywellVenomTools

Even trying to request access to Honeywell extranet seems to be broken, so I would be sincerely grateful if someone could help me out here.

My email should be in my profile if I set it up correctly. I can provide a FTP folder share (email server does NOT like jar files).

I've never had such a hard time finding modules.

Thanks!

I'm currently working on an AX to N4 migration, but I do not have access to the Honeywell modules. Will someone please email them to me? 4.6.96.28 preferably. Thanks in advance!

tlambert@engineeredcooling.com or troyofomp@yahoo.com

[zaltis]

Hey guys, I am trying to launch a 3.7.106 Niagara station on my local workbench and need the honeywelllonspyder.jar file and any other honeywell jar files you may have. Please help if you can.

Thanks!

[Reckles]

Hey guys, I am trying to launch a 3.7.106 Niagara station on my local workbench and need the honeywelllonspyder.jar file and any other honeywell jar files you may have. Please help if you can.

Thanks!

You might want to put your email address in your profile if you want anyone to send you over the files.

[zaltis]

Solved - Thanks for everyone who helped me out on this. The jar files were needed, in addition to a spyderlonbacnet installer application. Basically the application loads the jar files into whatever version of AX you want, otherwise the jar files won't load and your station will fail.

[jgraham]

One more here that could use those files. I've uploaded from the JACE, but it's not enough. :-) Thanks!

[Reckles]

One more here that could use those files. I've uploaded from the JACE, but it's not enough. :-) Thanks!

AX or N4?

[jgraham]

N4

[Reckles]

N4

You've got mail!

[iControl HVAC]

Can I jump on the bandwagon and beg for the Spyder LON modules for N4 also (wouldn't mind ax3.8 too)
Please please please, anybody

[Reckles]

Can I jump on the bandwagon and beg for the Spyder LON modules for N4 also (wouldn't mind ax3.8 too)
Please please please, anybody

Sent you the N4 modules.

[crs7227]

Is it possible someone could help me with the Honeywell AX and N4 modules? Thank you in advance!

[Reckles]

Is it possible someone could help me with the Honeywell AX and N4 modules? Thank you in advance!

You've got mail!

[Habsy]

I could also use the 3.8 and N4 spyder jar's if possible.

Any help is greatly appreciated.

[Reckles]

I could also use the 3.8 and N4 spyder jar's if possible.

Any help is greatly appreciated.

Send me an email or add you email to your profile.

[Habsy]

Added, thank you!