Results 1 to 3 of 3
  1. #1
    Join Date
    May 2009
    Location
    SC
    Posts
    1,761
    Post Likes

    Trane UC600/800 setting device ID

    Quick question, some of my techs have run across these lately and it seems the Trane BACnet setup tool does not work on the UC600/UC800. Can this be changed locally over BACnet or some other means or does this flat out require Tracer TU?
    Scott Jalbert, WebCTRL ninja, Naiagara AX and Smartstruxure newb, SiteScan Retired

    The master has failed more times than the beginner has even tried

  2. #2
    Join Date
    Jun 2010
    Posts
    67
    Post Likes
    The BACnet Setup tool works with UC210/400/600, BCI-R/I/C controllers, but does not work with UC800. UC800 requires Tracer TU.

  3. #3
    Join Date
    May 2009
    Location
    SC
    Posts
    1,761
    Post Likes
    Thread Starter
    Ok, thanks.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •