Scotsman C0630MA-32B ice machine won't turn off the "Clean" light

[Olivero]

So I cleaned one of my ice machines today ran sanitizer through it and everything, it seemed to go on the cleaning cycle for eternity, so I eventually just pushed the off button and it stopped but the light doesn't turn off, I let it run for about 1 hour with the sanitizer.

Is there a way to manually reset that light?

[pecmsg]

So I cleaned one of my ice machines today ran sanitizer through it and everything, it seemed to go on the cleaning cycle for eternity, so I eventually just pushed the off button and it stopped but the light doesn't turn off, I let it run for about 1 hour with the sanitizer.

Is there a way to manually reset that light?

That you have to read the manual. It is in there!

[Olivero]

That you have to read the manual. It is in there!

Aren't you helpful today.

I looked in the manual, I didn't find it. I did find it online after some searching, you just have to push the clean button again while it's cleaning.

[pecmsg]

Aren't you helpful today.

I looked in the manual, I didn't find it. I did find it online after some searching, you just have to push the clean button again while it's cleaning.

Sorry but there was a specific sequence to clear it!

[Grayline]

Sorry but there was a specific sequence to clear it!

Yup 100% its gotta be exact.. the timingband wash as well as fill and refill has to be exact..they did it so there is no short cutting.. Taylor freezer put a time delay open circuit so one has to remove the front cover as to clean per instructions it has to be off for a full minute to clear the clean code..