Results 1 to 2 of 2
  1. #1
    Join Date
    May 2009
    Location
    SC
    Posts
    1,351
    Post Likes

    Johnson VRF CBN02 How to set device instance?

    Device instance on the BACnet screen set to 1 by default. How do I change it? Nothing in the manual about what's valid and every time I change it and reboot it comes back as 1.

    The individual IDUs show up at random numbers up to 300 for this little system but some are 23,50,302 etc, totally random.

    What I would expect is you can put something in and have a prefix number but it isn't working that way.
    Scott Jalbert
    WebCTRL ninja
    AX and Smartstruxure newb

    The S in IoT stands for Security

  2. #2
    Join Date
    May 2009
    Location
    SC
    Posts
    1,351
    Post Likes
    Thread Starter
    Actually I'm having very fundamental BACnet problems with it. Sometimes I can get a discovery but never get point names and can never get multistate key value pairs. My controller can't bind to it with some points throwing unknown object errors and some points working. Working with both WebCTRL and BACnet Quick Test similar results.

    Says it is firmware 1.0.0.249, if someone has a update for it I'd like it.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Related Forums

Plumbing Talks | Contractor MagazineThe place where Electrical professionals meet.