Page 2 of 2 FirstFirst 12
Results 14 to 15 of 15

Thread: York YZ Chiller

  1. #14
    Join Date
    Nov 2004
    Location
    up in the hizzy
    Posts
    3,009
    Post Likes
    Quote Originally Posted by raptyr View Post
    I can't really share stuff on them atm but you get a good idea from the youtube videos and the range will be expanded over coming years, but if you are familiar with a YK VSD and YMC2 driveline and YT operating pressures then you know 95% .
    I figured you weren't allowed to share much,doesn't hurt to ask. I wont be seeing one those around here for years anyway.
    Out of curiosity, whats the drive bus voltage and how the volts/hz relationship plays out at high speed lets say 200hz? trying to compare it to a typical drive running on 460v with a 7.6 v/hz ratio, after 60hz the torque takes a steep dive.
    Thanks!
    There is not better place for the working men than the union! 100% UA the only HVAC union!

  2. #15
    Join Date
    Jan 2013
    Location
    United Kingdom
    Posts
    152
    Post Likes
    Thread Starter
    Bear in mind we are running 400/50/3 but dc buss 550vdc and start frequency around 40hz but that can be modified to suit on site

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Related Forums

Plumbing Talks | Contractor MagazineThe place where Electrical professionals meet.