Results 1 to 4 of 4
  1. #1
    Join Date
    Sep 2018
    Posts
    4
    Post Likes

    CCT Johnson Control

    I am looking for a simple program having 2 inputs and one output with complete information about the programming steps using Johnson Control CCT tool.

  2. #2
    Join Date
    Feb 2009
    Location
    Northeast
    Posts
    480
    Post Likes
    Here you go.
    New
    Custom Application
    OK
    Right click to add 2 inputs.
    Right click to add 1 output.
    Save.
    Done.

    Not that I think this is what you are thinking of, but meets the spec...
    Attached Images Attached Images  

  3. #3
    Join Date
    Sep 2018
    Posts
    4
    Post Likes
    Thread Starter
    Thanks a lot for reply and valuable guidance. Now how to build a simple logic (may be an OR gate) to get the output. Inputs for boolean are simple On/Off switches while out is mere indication light. It's just an experimental setup. I am not able to attach pic here but I can send you an email.

  4. #4
    Join Date
    Sep 2018
    Posts
    4
    Post Likes
    Thread Starter
    Finally able to do it.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Related Forums

Plumbing Talks | Contractor MagazineThe place where Electrical professionals meet.