Malco 1/4" - 5/16" duel sided magnetic hex drivers ? ? ?

[Gman59]

I have several on my service trucks. Saves time for sure. Lost a few magnets but you play hard that's going to happen.

Sent from my SM-G930P using Tapatalk

[Random]

I like them. I'd love to see a 5/16-3/8 combo for commercial, I can't remember the last time I saw a 1/4".

[Red Man]

I’d love to see a 5/16 and 3/8 combo also. I almost never use the 1/4” side. The feature that makes it so great though, is the ease of cleaning the magnet.

[lytning]

Thought I lost one. Now I have 2.

Ditto on what everyone else said. Great product. Especially being able to pick out the metal bits. Lost my first one aleady and on to the 2nd.

[corny]

Know whats good for cleaning magnets on regular nutdrivers...... That gasket stuff for duct mate..... that or if you can find some of that thumb gum that people used to seal holes and such with.

[Scoobie]

I’ve heard...the magnets are a little fragile and break.

[SuperTech2010]

I use them every day. Great great product. I have 3. 2 for back are extras. Going on about 3months with no stripping of bit. I do residential, light commercial. Also,I would buy a 5/16-3/8.


Sent from my iPhone using Tapatalk

[Al3x0017]

Never come out of my drill. I swear by them

Sent from my SM-N950U using Tapatalk

[hvacskills]

so I have been using this nut driver for a little while now ... I find there are often times the 1 / 4 " side is too wide to get into tight spaces .... IMO, Malco should do away with the yellow and red color striping and spend the costs associated with doing that on tapering the 1 / 4 " side, they are already machining the bit so the color striping is recessed, just machine a taper instead

[Bnmarshall]

Just picked up two lengths. Liking them so far. I like that they are so easy to clean.