Results 1 to 3 of 3
  1. #1
    Join Date
    Jul 2018
    Posts
    6
    Post Likes

    Facility explorer

    I am looking to verify what programming and points are connected to a few FX07 JCI controllers. Does anyone know what cable and software is needed to connect with these controllers and if it’s available for download.

  2. #2
    Join Date
    Dec 2007
    Location
    Connecticut
    Posts
    1,162
    Post Likes
    Quote Originally Posted by JamesHowell View Post
    I am looking to verify what programming and points are connected to a few FX07 JCI controllers. Does anyone know what cable and software is needed to connect with these controllers and if it’s available for download.
    Unfortunately even with the software you will not be able to upload the program from the FX07. All models are download only with the exception of the FX16. The name of the software program is FX Builder. As far as cables go, the FX07 came with BACnet, N2 and Lon so you will need to figure out which one you have. For N2 you will need a USB to 485 convertor. For BACnet, an IP to ms/tp router ( Contemporary Controls BASRT works well ) and for Lon you will need an Echelon 75010R.

  3. #3
    Join Date
    Apr 2007
    Posts
    15
    Post Likes
    Thx for the info, I never knew that we can not upload these controllers.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Contracting Business
HPAC Engineering
EC&M
CONTRACTOR