Results 1 to 3 of 3
  1. #1
    Join Date
    May 2018
    Location
    San Fernando Valley, CA
    Posts
    236
    Post Likes

    Confused JE36460C215B2520AP EVAP ADP coil 450PSI - R22 txv installed

    Will work with 410a? Doesn't say anything about 410a but 450psig typically indicates compatibility with 410A. This guy had a compressor blow out. I want to convert it to 410a piston and install goodman condenser to match his existing amana furnace.

    anyone know if it's compatible?

  2. #2
    Join Date
    Sep 2002
    Location
    Virginia
    Posts
    4,902
    Post Likes
    from what I see its Amana coil , copper tubing , 5 ton , nonbleed txv r22 , would need a number 93 piston using 410 ,but I cannot find the Seer rating , and that will matter when looking for the cond

  3. #3
    Join Date
    May 2000
    Location
    Indianapolis, IN, USA
    Posts
    39,268
    Post Likes
    If I recall, the 4 indicates R22 TXV which would not work with 410. Easy to get a TXV for 410 and bolt on. H4TXV03 or R E Michel 10H1887

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Related Forums

Plumbing Talks | Contractor MagazineThe place where Electrical professionals meet.