Page 3 of 3 FirstFirst 123
Results 27 to 29 of 29
  1. #27
    Join Date
    Jun 2003
    Location
    Madison, WI/Cape Coral, FL
    Posts
    9,054
    Post Likes
    Glad to here from you again.
    Do you consider fresh air change and maintaining humidity levels to be part of good indoor air quality?
    If so how much air change and what humidity level.
    Keep us posted.
    Regard Teddy Bear
    Bear Rules: Keep our home <50% RH summer, controls mites/mold and very comfortable.
    Provide 60-100 cfm of fresh air when occupied to purge indoor pollutants and keep window dry during cold weather. T-stat setup/setback +8 hrs. saves energy
    Use +Merv 10 air filter. -Don't forget the "Golden Rule"

  2. #28
    Join Date
    Dec 2015
    Location
    Austin
    Posts
    86
    Post Likes
    Quote Originally Posted by shane1900 View Post
    Randy can you share a link to the 15 lb carbon filter you are using?
    Here's the carbon filter- https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
    Here's the matching inline fan - https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

    It's loud, not pretty and aimed at the marajuana growers market -But it's very impressive in reducing VOC levels measured with an industrial PID meter.
    My go to device used to be the Austin Air HP+, but this device offers significantly better results at about 1/3 the cost.

  3. #29
    Join Date
    Dec 2015
    Location
    Austin
    Posts
    86
    Post Likes
    Quote Originally Posted by shane1900 View Post
    Randy can you share a link to the 15 lb carbon filter you are using?
    Here's the link to the Austin Air device I was using previously.
    Probably a safer bet than the other device as regards warranty and an established company:
    https://austinair.com/shop/healthmate-plus/

    A Canadian company, Airpura, also makes reputable devices.
    The TeraBloom units I referenced though had significantly better VOC reduction numbers than the Austin, but it's ugly, loud and I don't know how long the carbon will take to saturate.

Page 3 of 3 FirstFirst 123

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Related Forums

Plumbing Talks | Contractor MagazineThe place where Electrical professionals meet.