Greetings-
BACKSTORY: Client had Tridium controls contractor migrate CSI fieldbus to JACE using the JK_INET CSI driver and kept the 7793. (why you ask?... ) The 7793 on-board backup battery is bad and when lose power, it drops the program, THEN must move the 7793/router back to the LAN and boot up CSI INET/7 server running to restore. Keeping the 7793 is temporary until MR88s can be replaced (that is why), and so need to replace battery until then.
GOAL: Trying to create a backup 7793 before we pull the current to replace the battery. We have a couple salvaged from another site but need to change the address.
Therefore, we are looking for HC7410 handheld w/ documentation of pin-out of the cable required to change address of 7793 (or possibly 7798.)
Even just the documentation that may allow us to create cable and use an emulation app. Thanks for any help and your time to review!