Results 1 to 3 of 3
  1. #1
    Join Date
    Mar 2016
    Location
    Pahrump, NV
    Posts
    2,178
    Post Likes

    Anyone familiar with Testing Products International manometers.

    I am considering using a Testing Products International Digital Manometer, +/-101.5 psi, LCD #665 on a homemade manifold for testing differential pressures on back flow preventers. If it works it will have far better accuracy at one third the cost over the commercially available testers.

    Our county just adopted 2012 IBC. So, annual testing of back flow devices will be required soon.
    It's an upside down world we live in.

  2. #2
    Join Date
    Aug 2018
    Posts
    13
    Post Likes
    Get a testo manometer

  3. #3
    Join Date
    Mar 2016
    Location
    Pahrump, NV
    Posts
    2,178
    Post Likes
    Thread Starter
    This was a bit of an old thread. Once I went to the backflow tester training, I found that the testing equipment must be certified. You can't just make up your own rig no matter how accurate it might be.
    It's an upside down world we live in.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •