FREEZE PLUGS

[VTP99]

Yes thermostat radiator hoses and heater hoses

Now your pushing it

[hedrash]

Haha, that's funny cas I got it for $5.95.
Took longer to do the stat then the pump.

Attachment 734941
Attachment 734951

Lol. I was going to say $6 but threw a buck in for inflation, haven't done one in 15-20yrs. Getting that gasket off is the worst.

Sent from my SM-G920V using Tapatalk

[pctech]

we know your special Hans nothing bothers you
i don't put on long sleeve shirts until the temperature goes below 40

[pctech]

what are those

[pctech]

now what about the rust holes in the frame by the control arms?
the money maker is getting holes in her not good

[lytning]

Bondo?
JB weld?

now what about the rust holes in the frame by the control arms?
the money maker is getting holes in her not good

[hedrash]

we know your special Hans nothing bothers you
i don't put on long sleeve shirts until the temperature goes below 40

Lol. I have enough ink on my body I need to wear long sleeves. Actually the heat isn't bad here compared to NY. No humidity.

Sent from my SM-G920V using Tapatalk

[d2305]

Water pumps are easy to change when you don't have a timing belt turning it. I never saw a freeze plug leak.

[desert guy]

Years ago I bought a GMC Sierra from a used car lot for a decent price. I started the usual maintenance stuff with a new to me truck including replacing the coolant. A few days or so after I did that I was walking up to the truck from Home Depot and noticed a small puddle underneath it, thinking to my self nah can't be from my truck.
Stood there and looked at it and about 15 seconds later comes a drip. I kneel down and see another come from the inspection cover on the bell housing.
Stopped at Price Club and bought an Allied Floor Jack, went home and pulled the transfer case and transmission, clutch and flywheel. I replaced both freeze plugs with brass. Took a whole saturday. The truck had 144K on it when I bought it and kept it for another 13 years.

[lytning]

I understand there is no humidity in Hell, but the temperaturesame could kill you. 😁

[pctech]

Neather are legal for use in Maine now Marc.
Especially in that area.
I am going to assume he will run her until he can get a new one

[pctech]

You know that INK can be removed easily now but to do that you would pay more for it then you did for you're house car work van and just about everything you own

[VTP99]

I am going to assume he will run her until he can get a new one

[pctech]

I would check that area weekly would hate to see it give out on you while your driving
how old is that thing any ways

[hedrash]

I would check that area weekly would hate to see it give out on you while your driving
how old is that thing any ways

Looks like he sealed it well with HI temp RTV silicone. I'm assuming that's the red around the plug.

Sent from my SM-G920V using Tapatalk

[pctech]

i meant the rust holes you cant see after the new control arms are in look at the old pictures and you can see the holes i mean hans.