VCRT PSA

[pacnw]

Thought I might as well hit the those hose fittings

You made these, correct?
Parts/pieces posted earlier?

[itsiceman]

No, I didn't mean look prettier, does it work any better now??

I can imagine I made them worse.

Tring to test them and these are my first Appion core tools since they went with only one oring.

I'm having trouble with them leaking with movement and random times on a rise test.

They might need some goop.

[itsiceman]

You made these, correct?
Parts/pieces posted earlier?

Yes, I made these with the parts/pieces posted earlier.

[itsiceman]

The fifty dollar frige looks like it fired back up.

I don't see a reason it burn a control board yet.

icanhas would love to see this 4 yr old fried over complicated proprietary control board.

Got 150 into it now

[itsiceman]

Ice maker looks busted ....... ##CK
LOL

[itsiceman]

Thought I might as well hit the those hose fittings

Both finished

[heatingman]

Nice video.


Sent from my iPhone using Tapatalk

[heatingman]

I can imagine I made them worse.

Tring to test them and these are my first Appion core tools since they went with only one oring.

I'm having trouble with them leaking with movement and random times on a rise test.

They might need some goop.

Do you have old vcrts that are in need of rebuild? If so, just unthread the male flare end from the old one and install it on the new.


Sent from my iPhone using Tapatalk

[itsiceman]

I mis typed.

I can't imagine I made them any worse.

These valve hold better than my old valves.

I have one that I can hiss.

[itsiceman]

I reassembled the main o-ring with a little Nylog. Still looses vacuum at the slightest touch like working valves, gauge buttons and connections.

Maybe it just takes time getting used to the single o-ring but so far I'm not liking this newer single o-ring design.

[AIR PRO]

Both finished

Pretty, but I can't understand why you are taking all that time polishing them? Seems to me a mirror smooth surface would be harder to seal. Cylinder head ports I get, this I don't.

[itsiceman]

All that time?
If I wasn't bothering with the camera it might have taken all of three minutes

[itsiceman]

Yesterday I grabbed a old VCRT.
Pulled a small freezer to about 350 then something popped and ran up to 1500. Wasn't a typical rise from gas burping out of the oil.
I have a feeling it was the tool cause I change to to one of the new tools and it went right down. By that time I had to put a fork in it and get it back on line.