Results 1 to 4 of 4
  1. #1
    Join Date
    Apr 2016
    Posts
    2
    Post Likes

    11 (not 12) lead dual voltage motor

    Looking for a wiring schematic for old 11 lead westinghouse motor. The motor has 2 start capacitors and 11 leads. The motor was removed by another person and he failed to ID what and where when he unwired it. The motor has a data plate that shows an 11 lead wiring diagram for both voltages but nothing on how the 2 capacitors are wired. Another problem is the motor actually has 10 leads not 11, I'm thinking it was rewound and two of the wires were connected internally. If I can find a schematic I hope I can figure this out. Any help would be appreciated.
    rt

  2. #2
    Join Date
    Sep 2014
    Location
    Los Angeles
    Posts
    33
    Post Likes
    Was this to be hooked up for high or low voltage application?

  3. #3
    Join Date
    Apr 2003
    Location
    St. Louis
    Posts
    1,039
    Post Likes
    take the motor to a motor shop and have them wire it. if you wire it wrong you might let the smoke out!

  4. #4
    Join Date
    May 2018
    Location
    MN
    Posts
    106
    Post Likes
    Kind of sounds like an old part start motor


    Sent from my iPad using Tapatalk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •