Results 1 to 2 of 2
  1. #1
    Join Date
    Jun 2015
    Posts
    4
    Post Likes

    Replacing Vanes in 93100 vacuum pump

    Long story short, i need to reassemble my pump and neglected to measure the rotor clearance before I disassembled it. Does anyone know what that clearance should typically be? Or, does it matter?

    This is an older 93100 3 CFM 2 stage pump.

    Chuck

  2. #2
    Join Date
    Jun 2015
    Posts
    4
    Post Likes
    Thread Starter
    I finally contacted the Yellow Jacket tech help and they were remarkably helpful. This sort of customer service is virtually nonexistent any more. The rotor to stater clearance on this pump is .001 inch for anyone finding this thread and needing to know.

    Chuck

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •