Results 1 to 3 of 3
  1. #1
    Join Date
    Dec 2007
    Location
    Connecticut
    Posts
    1,156
    Post Likes

    Trane Summit Question

    I have a customer that has a Trane Summit System. All controllers are COM5. They would like to add 2 stages of cooling to a heating only unit. The controller is an AH541 I believe. Is there a way through the front end that I could add these points to the controller or do I need Rover?
    Thanks

  2. #2
    Join Date
    Feb 2006
    Location
    Where the wind comes sweeping down the plain
    Posts
    357
    Post Likes
    You'll need Rover. I'm about 99% sure. There will be some configuration available through Summit, but I don't believe that you can change the unit type.

  3. #3
    Join Date
    Dec 2007
    Location
    Connecticut
    Posts
    1,156
    Post Likes
    Thread Starter
    Thanks for the reply. I suspected that was the case.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •