honeywell and niagara?
I've tried tridium niagara, honeywell webs, lots of admin combinations but nothing works
honeywell and niagara?
Don't worry zombies are looking for brains, you're safe...
Vykon default is, tridium:niagara for an embedded Jace
Windows based (supervisor, soft jace) would be your windows admin login
Do a serial connection and change it back to this default.
Kevin
Controls is a lifestyle not a job
That's what I thought but it doesn't work. They must have changed it.
Do you know how to reset the password and unlock it?
I am not going to post it but if you dont I can email you.
It's probably somewhere I can did up. I'll have them contact the installer and try to get it first. Thanks
It is recommended that you change the default user name and password when you commission a Jace. It makes it a pain in the a.ss but it is recommended. There are programs out there that can search for platform IP using key words and if defaults are left as is then unwanteds, is that a word, can cause havoc.
Probably should make it unique per site also. Some prick like me might get access to it and suck out the password you use everywhere.
Propagating the formula. http://www.noagendashow.com/
Same guy different jace. I've got a jace that where the platform defaults were changed and I can log in because my login 'remembers' the password but I don't have it. I can get into the jace but how can I reveal the password? Seems like if I log in I should be able to unhide the password.
How bad do want it?
On at least a J2, J6 and 403s you can pull out eeprom and its stored in plan text. Of course you need a reader and an adapter for PLCC32.
Propagating the formula. http://www.noagendashow.com/
Sounds serious. I just went ahead and changed it so we'll go from here. Thanks.
Exactly, its the road less traveled...
Propagating the formula. http://www.noagendashow.com/