Reply
The Entouch One Family consist of Entouch One LAN or WIFI device. It is through this device you will connect the Entouch One Lighting Controls device.
You can also connect the Entouch One GM8 Energy monitor device.
Entouch One LAN or WIFI
EnTouch_LargeCat.gif
DATASHEET - ENTOUCH ONE.pdf.pdf
Entouch One LAN or WIFI device Info
SPECIFICATIONS
Built in WiFi, Ethernet, or Cellular data communications
Built in gateway communicates between devices in building
Patent-pending HVAC control features reduce runtime and energy across multiple HVAC systems
High resolution color touchscreen display
Supports multiple stage heating and cooling
Intelligent fan modes to control comfort and humidity
Internal temperature and humidity sensors
Configurable support for external temperature sensor
Fully programmable 7 day scheduling with occupancy modes
365 day calendar support for special events and extended hold
Built in security features limit local user adjustments to temperatures and settings
Configurable outputs support humidifiers, dehumidifiers, ventilators, and other devices
Mappable inputs connect to CO2 sensors, motion detectors, security systems, and other devices
3 years Warranty
Sensors that you can use 10K Type 1, 2 or 3 or 20K Type 4 sensors. This mean the sensor already installed can be used.
Fan Failure to send E-mail setup info
Put a current switch on the fan power wire and then wired the current switch output to our L terminal on the EnTouch One.
Then set the L input to be an alarm setting with a normally closed contact (contact is based on the switch used).
Then they set it up in the portal to send out an email.
Entouch One GM8 Energy Monitor device.
Entouch One GM8.JPG
USER GUIDE - GM8 QUICKSTART.pdf
Applications In-panel energy monitor for commercial AC panels
Panel Rating Three phase or single phase electrical panels up to 4,000 amps
AC Voltage 208VAC, 480VAC, and 600VAC inputs
Branch Loads Monitors one main input and up to eight branch loads
Wireless Data is transmitted wirelessly to an EnTouch One master controller. No external wiring required.
Current Sense Supports split core current transformers for rapid installation
Monitoring DSP-based monitoring provides high accuracy readings. Data collection every 60 seconds.
Remote Access Detailed energy data and daily total usage accessible through web browser or mobile devices
Entouch One Family ( Thermostat LAN or WIFI, Energy Monitoring and Lighting Controls)