ReplyDoes anyone have the Pinout for the DB-9 to RJ-11 to comunicate with the smart 2 card
Regular Guest
E-mail is set up ..
Regular Guest
Does anyone have the Pinout for the DB-9 to RJ-11 to comunicate with the smart 2 card
Regular Guest
Recovery1,
Did you find the pinouts? I have them available, if you still need them.
I'm looking for the PC tool. Any help there?
Doc
Professional Member
Again, an email in your profile might help someone who could send it to youOriginally Posted by Dr58
Jogas
Four wheel therapy, my 1968 Camaro is gone and will be missed
Regular Guest
jogas,
Info about the PC tool can be sent to <email addresses belong in your profile>
thanks - Dave
Last edited by jrbenny; 05-26-2009 at 06:45 PM.
Regular Member
Dr58,
Read the rules, for that matter this very thread!! NO emails in posts
Chris (CFC)
Professional Member
Dr58...you've got mail.
Jogas
Four wheel therapy, my 1968 Camaro is gone and will be missed
New Guest
I am looking for a copy of Staefa MS1800 version 2.1 control software and will need to install on a workstation computer running Windows XP service pack 3. Can anyone help me find a copy of this version and will I be able to run this version with my OS or do I need to setup a virtual PC?
New Guest
I'm new at posting here. Does anyone have any information on how to change the plant process water set-point on the Staefa MS1800? I have no manual and need to raise the temperature up from 55.5ºF to 68ºF. I tried control summary, DDC 1, Cp con 1 and editing to L0 set-point, but so far, the water temperature remains the same.
I reset the control valve on the return side at the exchanger, but still no go. Any help would be greatly appreciated.
Thank, in advance.
New Guest
Después de 30 años usando staefa 2000, fallo el dongle. Necesito por favor cómo puedo adquirir software ms1800 y saber en que versión de windows se puede instalar.
Desde muchas gracias.
Saludos
Former Site Administrator- Now Retired
Translation
After 30 years using staefa 2000, the dongle failed. Please, I need how I can acquire ms1800 software and know in which version of windows it can be installed.
.
Posting Permissions