Search:

I have never seen that in any of the mini-split Mitsubishi/trane service manuals...no problem with showing pics to-get warranty evaporators . It actually speeds up the replacement because I have...

I use UV dye and check a few days to 2 weeks later..Trane/Mitsubishi is the same mfg...every leak I ever found is at the AH with pinholes in the evap, and where the liquid and suction tubing Is put...

Geeze, I have installed many new construction 4 zones (2 zones per system) from 2 systems in 4,500sq ft and larger and that took a lot of ductwork and design to do the right way...
You are asking...

seeing you are a home owner and not in the business, you need to have the correct home load design assessment on what your actual needs are.......the others will be along shortly to pretty much say...

I have seen plenty of hung up gas valves due to internal corrosion/rust holding the pin. The WC and improper gas trap causes it.

I also have the anti-tamper bits to take them apart..I have used...

it should have been on the inspection report. one of the things a new homebuyer like to see is a new hvac system replacement and just stayed with that. the prior homeowner might not have liked the...

You definitely need to have a professional look at it due to the homes layout/design and age..mold is a health hazard for sure and needs to be adressed accordingly

i always clean the flamerunners and flame sense rod on package units especially when a cutout of 30 seconds occurs, check all wiring as well. i directed another younger tech on a carrier and the...

its just a fast manufacturing process that is the lowest cost and you can tell if someone worked on the system before because there would be schraders on it..

yes, i do it quite a bit, i do inline on the suction and a T on the accessible high side..

https://store.danfoss.com/en/Cooling/Valves/Control-Valves-and-Regulating-Valves/Mechanical-Valves/Crankcase-pressure-regulator%2C-KVL-15/p/034L0042

i dont see any adjustment on it as its factory...

i still have my manual rigid 3 head tap, with vise tripod and oiler...it has to be a clean square cut with a pipe cutter but i grind the tiny lip if one is present slightly, the secret sauce....you...

https://www.samsunghvac.com/single-zone-high-wall-systems/novus other info
...

service manual..
https://s3.amazonaws.com/samsung-files/Tech_Files/RAC/Novus_AR0_JSALBWKXCV_AR0_JSFLBWKXCV/Service_Manual/ARxxJSALBWKXCV+Service+Manual.pdf

pg troubleshooting...6-1 shows voltages...

E0 (eeprom error code) is something wrong with the indoor unit communication , lost comm wiring possibly, a typical 3-5 minute power off at both units check /clean wiring, restore power then...

a home depot or walmart low profile storage container works..i use it for my grease gun but keep rags in it as well

talcum powder will work reasonably...i always use PVC in the opening when going through brick/concrete/firewall penetrations and round off the inside with sandpaper then use scrap sheetmetal as an...

its a 3 hour written test then a 2 hour oral interview to see what classification you will be put into...many fail and they are put in the Special Ed classes...then you earn points as you go...

is any of the wiring hitting/rubbing the 24 or high voltage in the harness? i dont like to see high voltage and 24 next each other and separate it whenever possible..does it look weatherproof or more...

SOL???? Maybe ROS....and thats a much more very “condemning“ expensive problem ..a fire and health hazard! Hope there is Working CO detectors with Fresh batteries there..

It’s only theoretical as the universe keeps expanding exerting pressure on it. The full moon has passed already! Lol

i have (4) of the 3 topping dominos for $9.99 with the online coupon it is ...everything else is BYOB! nice and simple...

it bothers me more seeing that suction line filter still on it...i only see those used for burnouts that are supposed to be removed a short time later....but that creative bypass wannabe copper...

you are new here, you need to check your wiring diagram so you will need to see what is the controlling the water level of the unit...this is not a DIY forum btw...

with still no updates or diagnostic info, lol what was done, pin out on wiring...

lol, i have lazy co-workers who like to say they did it all but apparently...oh this must have just happened...i also ask but what was your readings? oh they are good! good????? so why am i getting a...

hmmmmmmmmm...ill have to make sure in my online advertising it will include.."No Refrigerant system testing diagnostic tool charges" as its included in the service call , Free yearly blinker fluid...

i am allowed to keep the scrap money after a job (disposal) and i see the van go in at 6,300lbs on the scale and 5,700 on average on leaving...so that means i have 1,300 lbs of tools/replacement...

well what do you think fakebook does and all the other SM folks, any picture that is posted can be scanned for background objects and products to send targeted ads to you, have the app on your phone?...

I might have difficulty understanding if it is that way because there are firewalls between units that cannot be interrupted even with a fire damper..and i have seen that same method repeated going...

ill bet ya if biden gets in you will see $.75-$1.50 increase in fuel prices and tolls jump up to another $3.00 to pay for all those "poor" illegal folk and "free college for all" and the "scam" green...

thats too funny....my sister had a Tiburon because she thought it was cute, one day she saw it needed an oil change and went to a shop to have it done...it took 30 minutes to do...after she left the...

on another positive note...radiant heating and cooling if it stays exposed in the conditioned space! lol

you probably have a bare minimum 50 cfm fan according to building codes..they dont last very long and barely anyone cleans them. there should also be a damper door leaving the housing and they can...

i saw $1.84 in SC last week and its $1.99 by me in NC currently at the lowest price, $2.08 is average in NC Raleigh Area..Gas Stations close to the interstate charging .10-.15 more, so it pays to...

i salvaged a single tube exhaust DeLonghi PAC AN125HPEKC heat pump/dehumidifier "for free" https://www.amazon.com/DeLonghi-PAC-AN125HPEKC/dp/B078SFGT2D and did a very low through the wall exhaust in...

i havent see one of those in a long time, i only see the reduction fuse caps/ends on some..
https://www.mcmaster.com/fuse-reducers/
...

i actually do the same, lol but only as needed for function and knowing the breaker is the correct size.. i have used 1" copper and hammered the ends for the blade type fuse replacements..if i dont...

its the demographics and illusion they are making more..lets say a NY or CA home near the city is worth $900k+ with high taxes, in any other city the home is $400K+ with moderate taxes, you actually...

oh geeze, it was awhile ago.....it was known as the "extended cabinet version " with your choice of coil size..the best reference i could maybe compare it to on looks would be a mobile home downflow...

to put it very bluntly, it depends what system you are selling them, "only" that particular product will "only" contain said components********the outdoor unit has to match the indoor unit...

thank you for answering..

its has been a very long time since i ever installed an 80%, a very long time....all newer ones for the last 12 years with 90% have the coil inside opposite of the...

you have some nice detail work behind it, good to see!.. it does not look far too out of design specs for something on the fly....

a couple of questions though
1) is heat going to work properly,i...

oh geeze! its on youtube with 5+ million hits already! WoW! lol

looks like a corruption of windows files problem going way back...

i did a search on DDG with firefox ( Distech Controls CLR20r3 )and found this ...
...

you need to have the trailer park to high end area massive racoon problems then! lol aside from the random black bear visits, lol..some raccoons will go through doggie doors and rob your kitchen, lol...

i would have had more fun and blamed the pest control people who are also supposed to control that, lol. then blame the town who allowed destruction of a forest where the homes are now where the mice...

sawzall and a plasma cutter is all ya need! lol..

i use these instead....of the tin snips
Dual Head Sheet Metal Cutting Nibbler Hole Saw Cutter Electric Drill Bit ...

every layover for connecting flight at DFW is always 3-4 hours on my end...that sucks!
i had a few offers to work permanently in Houston and Dallas after my divorce because things are bigger there! ...

wait till you see all the newer rtu $25.00+ fuses instead of the $5.00 ones you use there, lol cfm fuses are overrated! lol the unit will just trip out on high head pressure still requiring the...