For sure, the connection to the regulator is 3/8 flared, but the valves are tapered NPT. Manufacturer shipped the original assembly with a sealant between the valves and manifold so I thought I would...
Type: Posts; User: Ezpz
For sure, the connection to the regulator is 3/8 flared, but the valves are tapered NPT. Manufacturer shipped the original assembly with a sealant between the valves and manifold so I thought I would...
should the new regulator fail I would like to just unscrew it rather than fuss with clamps
I've just bought a new flared manifold to get away from the old barbed fitting, the original valves are in perfect condition!
Looking for suggestions on a pipe dope or sealant to use between the valves and manifold in my propane grill! The valves should never need to come apart again, just want something that holds up well...
Well done!
Very impressive!
Stunning craftsmanship to say the least
Clean the glass, apply tint over soapy water, and burnish it down with soft squeegee! Cleaning and trimming the edges is the hardest part, just use a straight edge and leave a small gap if you dont...