Search:

Are you sure?

Seems to me the control would just signal the blower and the hum terminals.

He gave you the answer.

To top it off, it's a gun free zone.!!!

Guess the gunman disobeyed the law and law-abiding citizens paid the price, again.

Pretty stupid to keep a military base gun free, isn't it?

Except for the tools you stated, same here.
Company does NOT provide any resources to buy or replace tools, no matter what!!

Hell, I'm even responsible for their tools if the van gets broken into.

You need to determine the correct wiring by reading the manuals of each of the components you have.
Then understand how they are controlled.

If this is over your head then call a professional.

Thanks!!

How do I know if it's a 5 series?

$12,383.56

OP does not say what the second stage of heat is.

So first stage of heat and only stage of cool should be the same, 3, per defaults.

Depending on type of heat in second stage would determine...

These cracks are only the ones at the tube connection to the inlet collection/header manifold.

We have the same email that I was to give to a specific customwr. Another company shut down their 4...

Why inform the OP.
Obviously he knows better than the pros!

The War started in the 7th Century and lasted through the 17th Century. Many will contend it never stopped; the Facts below are Historically correct.

In 732 A.D., the Muslim Army, which was...

Define short term insurance.

There are catastrophic policies and they don't qualify to keep you from getting penalized by the government, so be careful.

Now, I know of people who use them and...

And when sh!t gets messed up and you complain about the cost of a professional you will know why.

Have fun and keep us informed on your project.

Make it simple, don't install the NEST!!! It's only going to cause headache down the road.

Quite possible the NEST caused those issues.

Trash the NEST and install almost anything but!!!!

If no spark, but there is a snap/click when you push in the igniter button then it's probably between the 2.
We can't give DIY advice.
If this doesn't help, time to call a pro.

No DIY here, so time to call in a professional.

Sounds like a simple fix, but you never know.

This sounds like the issue my customer had.
Occupancy is off..

Thanks.

That makes sense and most likely NOT what I had going on.

Are you saying that there is priority to the wall control or that the remote app is ignored?

I had a customer with a similar issue to the OP. We changed the UI, but I was not sure that was going...

But not all get installed correctly!!

Have you had someone come out and explain how the system works and do a service on it?

Zoned systems and in another dimension of issues vs non zoned.

Could be zone controls, dampers, bypass,...

King valves?

We don't stock any, I just installed one a couple weeks ago, that's how I know. I know it was not an old style due to screen color and onboard "manual".

I'm away from work for until December. I...

Not sure of this unit, but midea makes Carrier and Lennox ductless units, if not others.

We have installed them as well, mostly fuel and a/c not heat pumps.

I hated these stats when they came out. Nothing but issues with that connector, uneven wall, normal use, bumped, etc, all made that connection suspect. It was not always a complete failure, but maybe...

I posted in the resi pro section of a heat pump with a T6 and reversing valve issue.

Maybe this is my issue and not as I thought in my post.

I did seem to have lesser voltage on O and/or...

Someplace there is a data plate with model and serial number.
Inside side wall.
On the back of one of the doors to unit.

You went there. :grin2:

There are ways to minimize/eliminate condensation in a situation like yours.

A qualified installer would know how to do that.

You are not losing any, or at least not significant, CFMs with a bypass humidifier. The air is staying in the ductwork.

Depending on the set up, I would be running the humidifier even if there is...

Why does it take 2 guys? Is one of them blind and the other deaf?

Why is there a peak surcharge?

Sounds to me like another company should be found, both for the continued issues and the charges...

What is a pressure blasting noise?

Depending on registration and owner, there should be a parts warranty from Lennox for 5 years or more.

Something is killing them, if it is indeed a bad switch each year.

How did the installer set it up?

Why are you changing their set up?

Venting, the pipes for intake and exhaust, should be sloped at 1/4" per foot back towards the furnace to allow water/condensation to drain. It could, if allowed by mrf, slope towards the exit of the...

What does this mean?

It is still forced air if you are using ducts.

Do you mean it was a heat pump and now it's fuel burning?

Definitely NOT the cause of the blower not coming on!!!!

What is this post about?

That coil is only a 2 ton coil, 24,000BTUs.

Unconditioned attic does not help, well duct work in the unconditioned attic.

You stated that you can only get it up to 60°. Are you using a setback...

EXACTLY!!!!!!

I have seen many motors and controls rendered useless on generators that either were never set up properly, undersized and/or delivered dirty power.

Personally, if this is...

This and the cost of a heat pump water heater just don't make sense to me in justifying them.

And how long the venting is.

What is your concern?

.

30V is higher than I would expect.

Ecobee compatible with the zine control board?

You are correct, that zone board does not support your system.

Guess your hvac guy was not too knowledgeable...

Auto

OP has no idea what to do or what value to look for.

Should call someone who does!!!