Search:

That's usually one of the first things I tackle when I take over a site. As long as things are named similar, hit up the program service and you can hide those in a few minutes after making sure...

We remove override capabilities through the bas, we also dumb down the graphics and display less set points. They don't know what the equipment is, so they shouldn't be able to over ride it from the...

870553

Hopefully the picture attached to the post. I found an old flash drive and this was on it.

I don't believe your plan will work the way you want, the NRIO network should be on it's own as far as I know. How many NRIO modules are you wanting to install on one Jace?

Any chance you can...

Custom Control Graphics is who you're talking about.

I mostly use bascustomgraphics.com , they have great pricing and usually have a fast turnaround. I've also used Custom Control Graphics, they specialize in i-Vu systems and are good too.

I'm going to try this out next time I'm at this site. I've got a couple extra BACnet routers I can use.

Thanks.

The CPU usage really dropped down that low after the patched files using 4.12? That's great news .

I've got one Jace8000 on 4.10.1.36.2 with 4 com ports, 115 devices. On station startup, the CPU...

Haven't used them, would like to in the future. It would be great to swap out old Lon Spyders or XL15's with optimizers and reuse the cable, but I'll wait till it's out a year or two before we use...

I had something similar happen at a site with two jaces on 4.10. It was random points, only a few points here or there wouldn't update on the supervisor, or some would take a while to update by...

It was for a food manufacturing plant, they have schedules for every unit for the different production areas. They've had just the Jace for a long time, but I added the supervisor last year.

Sounds like there is no easy button for existing schedules. Last place I put a super over an existing Jace, it had over 60 schedules. It kind of sucked having to put the schedules in the super and...

What are you guys doing with existing schedules in the jace? From what I understand if you have existing schedules in a Jace, they can be brought into the super but are read only and can't be changed...

There are YouTube videos on export point tags and px tags to use existing points and graphics pulled into the super. It's actually extremely easy to use the program service to add tags and do this. ...

Maybe they made it easier since I took the class, it was 2019 I think. From what I remember back then NRIO wasn't even supported in ACE but it is now. Since it's been out for a few years, maybe they...

I've used them a couple times with an NRIO 34 module to run an air handler and have a touchscreen for standalone applications. So far I can't remember having any problems with them. From my...

Thank you for the help! Next time I'll hook up with network service tool and check the version, and I'll get the latest drivers from hvac partners.

Thank you.

Are you using 2 conductor wire or 3 conductor and connecting the reference terminal?

Thank you for taking the time to make that response, it helps out a lot!

I'll have to look for the version the next time. I remember when you do a bus scan with NST it shows the version, maybe...

I've also seen issues with the set point not taking on the UPC. This one seemed to work on the last one I installed, but it took longer that I expected for the change to update.

When you guys are using Equipment Builder to generate a program for a UPC, do you use the latest version available or the older version made closer to when the unit was manufactured? If you look at...

Thanks for posting that. I'll give one of those a shot on my next job, they look good.

We usually use the Honeywell webs HMI in 7" or 10", I've only used the 15" one time. If those aren't available, I've used a Microsoft surface Pro with a panel mount from Vidabox.

Last CIPer30 I...

I change my mind, I'll take a tip. Not sure what the heck I was thinking 16 years ago with my last post.

Visio.

It got bad when Dectron, Poolpak, and Seresco all teamed up back in 2018. Just got to deal with it. Some of the parts like sensors, valves, compressors, you can get from other vendors, but if you...

I had the issue on a few jaces that I upgraded from AX to N4 where some links were missing. I posted about it here and someone posted a bulletin on the issue I had. If there was an ndio to nrio...

With hunting like that, the pid needs to be tuned and also the sensor placement could be bad. Sometimes I'll use averaging sensors if there is issues. Also the minimum valve position in the logic is...

I can't speak for every brand, but the Honeywell edge controllers I use will host graphics. They're basically little jaces with built in I/O and expandable I/O. We do standalone panels all the time...

Already happening around here. My buddy is at a high volume controls shop, they just picked up distech and I've been hearing of others doing the same.

I called up last week and was told they didn't have ciper 30 and the ones that are coming in are already sold. They had expansion modules though. So hopefully they start catching up, but it's...

No ciper 30 or 50 either from what I heard last week.

http://www.customcontrolgraphics.com/

I used these guys on my last Carrier job for 3d floorplans.

After the last couple years, I wouldn't use anything new from Honeywell unless it's been out for a year or so.

http://bascustomgraphics.com/

We bought the standard library from them and I've had them make some 3d floorplans and other things. At their prices, it's not even worth it for me to try and do it...

I've never integrated an intellipak into a control system before, but I service them all them time. In the configuration or setup menu on the hmi, isn't there a setting for what each set point...

It's not great out there for the BACnet Spyders. I just ordered 2 LON PUL6438SR and they had them in stock, but not sure how many. Last I heard the ciper line is hard to get, but I haven't asked in a...

Roundhouse carpenter jeans are great, but a little over what you said you'll pay. They are heavy denim and made in the USA. They are $60 bucks each, but they are worth it.

Spyders and strikers will automatically detect baud rate on power up, if you change the baud rate you'll need to cycle the power to all the devices.

He has a good class, I got my N4 cert from him a few years ago.

I haven't used one yet. I took a class a few months ago that was put on by a guy from Honeywell, he spent a few minutes talking about them.

Honeywell has the new BACnet Tc500 stat that came out, but it's only 3 for a conventional system, and 5 for a heat pump. Any chance you could put a time delay on the last stage, so if third stage is...

Good thing I just got almost all of my controllers end of last week. Just waiting for the expansion modules and a couple jaces.

What exact issues you're seeing with ipads and iphones?

That's not good news. I've got 10 Spyders and 5 Sylk IO's on order since September. I need them in probably 3-4 weeks at the latest. I think I've got a couple silk io in a cabinet somewhere I'll...

That price hike, plus I was told they aren't making strykers but are focusing on Spyders right now. If your job was bid for strykers, tuff luck pay more for the Spyders and now another 7% . I'm...

I've put in a bunch of the CIPer 30's l, I've seen a few issues with those and that's one problem I haven't run into yet. So if you directly connect with your laptop with nothing else connected,...

https://www.google.com/url?sa=t&source=web&rct=j&url=https://www.broudyprecision.com/wp-content/uploads/2020-04-30-TridiumTalk-Niagara-AX-EOL-QA.pdf&ved=2ahUKEwjYm7Cjq-nzAhXUWM0KHRi7DRkQFnoECDQQAQ&usg...

Just heard my Spyders won't be in till December, jaces 3 + weeks away, called for some BACnet routers from CC, 12-16 weeks. Good thing my jobs aren't starting until January.

Increase on Honeywell controls now, except jaces. Ordered some Spyders, haven't received them. Was told CIPer 30's are out for a while as well. Should be interesting.