Search:

It was Poodlehead Mikey, I remember years ago he posted that and with pictures I think. It does work like a champ too!

Years ago I tried this setup and it was a no-go. I got tech support involved as well and they didn't seem to versed in it either.

I still have the test rig on the corner of my desk with the...

I use No-IP.com. They have DDNS and you can get certs through them also (RapidSSL). They have software that runs on a pc/server that periodically checks the public WAN IP and if it changes it...

I have used this:
...

If you are taking about ALC corp. system hosting, yes I agree with you on this. We have our office on it and it works occasionally.

With 8.5 you get most of the options you get in SiteBuilder right through WebCTRL now. If you could get going with ALC now, by the time the ink is dry, 8.5 would probably be out. It is really going...

Yes, I would like to stick to Windows. If someone else other than me needs to get into it for some reason, Linux will be a show stopper.



I got the cheapest AWS server right now. It only has 1...

I'm still with AWS, how does Digital Ocean and Linode compare? I know in the past you have stated you shoot a VPN between sites and your hosting solution, but what stats do you have you don't mind...

https://www.windowmaster.com/control-systems/smoke-and-heat-ventilation/

We did these via BACnet interface for smoke evac.

No sorry, copper length as well.

No problem, I'm glad someone finds my rambling useful.:putergreet::LOL:

No it won't. The closest this thing will do is tell you if your conductors are crossed on a copper cable as far as that goes.

Correct, just enough info to be dangerous.

It was $2,800 by the time it was said and done. I got this one because it has a gbic connection since we are getting into fiber more and more. It will...

No sir, it won't...well it hasn't yet anyways. It'll tell you the IP of the switch, if it is POE, POE voltage and wattage, manufacture, name of the switch, what VLAN the port is that you're on, all...

:LOL:

I'm good at dodging bullets most of the time, but the top of my head looks like a train wreck from being beaten over the head by them!:beat:

I beat my manager over the head to get one of these. It has already paid for itself in my eyes. It tells you all kinds of stuff.

https://www.netally.com/products/linkrunner/

I've walked up to...

I've been digging around on and off and finally found these.

https://www.elsys.se/shop/product/ers-eco-co2/?v=f003c44deab6

I ordered 3 of them last night, and I am still trying to find a...

I looked into this, but I haven't found any sensors that are for North America use. What wall mount sensors would you use?

Not sure on specifics other than that they where charcoal filters.

835990

So something like this would have been better?

The only thing that I've seen filter well enough to get the smell out is charcoal filters. We were at a large waste water treatment facility doing their lab and office space and their OA units had...

I know you mentioned single-zoned equipment, but I am starting to do it more and more with VAV's that serve small side-offices that are rarely used. They will have a min. CFM when occupied and will...

I would tell him that the connection point is not even rated for 600 volts. I would tell him that it is on the mfg. for not having the comm. connection it the 'right place'. That's just plain silly.

Completely agree, somewhere you have to draw the line.

Damn, that thing is slick.

Yes you can, but there is only one specific model (FC-20) that can do this. It does not have an IP port so that is the only way to download the program to it.

Does the http://www.hvacrcontrol.com/ router thing do this? I know it has modbus capabilities and Lin seems to add features within a week if need be.

Sounds like it.

I am just trying to stay as close to a 'one-to-one' connection as possible without having to have a JACE or some other widget in the middle.

I was hoping for a BACnet option...

Thanks for all of the info guys. The mech tech that was out said the LON card was the only thing available, but after talking to him for a few he didn't sound to confident about other options. So it...

Thanks for the info Balibe. It is a CVHE chiller and it doesn't have the UCP2. It has this

826911

Does anyone know of a gateway for Trance comm 4 other than a JACE?

I've searched through here and the only thing I found that was close is what Balibe posted about back in 1/2021 from...

Nice find Amigo. Like fcsm, I have looked as well and didn't find anything. Have you used these or is this something just came across Amigo?

I have it to where if it gets above 90 degrees right now and the humidity is below 50% RH. I have 5 float sensors going up the side of a 35 gallon plastic barrel that both units drip into. As long as...

Very true if you use city or well water. A little off topic, but it might possibly apply to the OP and just a story anyways.

Years ago Poodle Head Mikey was in on a discussion about using water on...

I have wanted to add superheat and subcool readings for my units at the house. I already monitor compressor amps, fan status, and shut down on over amping. I was going to add transducers to monitor...

It is probably the service is starting before the IP connection has settled down. Change the service to delayed start and that'll probably fix it.

824989

This is a link Orion242 put up years ago, still works.

https://www.dropbox.com/s/56v1yyw0s85yosr/Visio.zip?dl=0

This is my biggest gripe about Easy IO. If you go to connect to one that you haven't ever connected to, it is a crap shoot if you have the right kits that are needed.

Just bought one just now, I'll dive into ASAP.

I think I know where you are coming from. I did air balance for a long time, and was sick of the construction sites and traveling. If I had heard one more GC tell me not to mess up his ceiling tiles...

I had this happen in a LX6 lighting panel, tech support case came back with this that worked for me:

The values used will depend on how many equipment files assigned to the controller but for a...

Can you enlighten us on this as far as where you say the consumer market? Where are you getting this from? So you're telling me every vav will have its own webserver we have to log into just to check...

Just to throw this out there, you can lock outputs in software on these modules and they will stay put during a program download-great for critical applications.

I just got back and look what kind of $h!t show this is. They had a meeting after we had talked last and it has come to this. So now it has 904,908, & 922 (the 908 and 922 temporarily with the Easy...

It is on the load side-per the cut sheet. Fail as in the status goes off/open on all three when the drive is steadily pulling 35 amps. Tomorrow, I will be putting them on the line side per the onsite...

I am beating this horse right now. Even with 3 in parallel it will still fail within a week.

819012819013

Nice sheet metal work. One question, is that the dryer vent blowing on the CU?

Installers, service, and everyone else involved are going to have to be more network savvy. I just don't see the enticement of it all.

So, if you have an all IP based system you won't need a...

Just to update on ALC's IP unitary controllers. Realistically, we will probably see them in less than a years time.

He would see the trends that are still in the module (like what he has in the screen shots), he just wouldn't get the historical trends. Also, he won't get alarms either.

It is either that module is losing power/communication or you don't have port UDP 47808 open at the server.