Search:

Type: Posts; User: FilterRoute10

Search: Search took 0.11 seconds.

  1. Thereís a point call occupancy command. 1=local...

    Thereís a point call occupancy command. 1=local 2= occupied 3 = unoccupied. The local is set to look at PIR sensor. When I set the occupancy command point to local=1. It will revert back as 3...
  2. It can be done, you should be able to discover...

    It can be done, you should be able to discover the spyder with the converter. Bacnet spyder have dip switches. Dip switch will tell you the addressing on each device....
  3. Viconics Zigbee gw2pro with vt8650 tstat write issues

    I have a jace 8000 connected to zigbee GW2-0l0 pro wireless gateway ip over bacnet. The zigbee gateway is communicating wirelessly to vt8650 Tstat. When my supervisor station send a occupied command...
  4. Replies
    2
    Views
    381

    Thank you

    Thank you
  5. Replies
    2
    Views
    381

    Honeywell Ciper 50

    Have anyone ever used a device call cipher 50
  6. Replies
    14
    Views
    3,896

    Make sure you have the correct domain ID. You...

    Make sure you have the correct domain ID. You could find out the domain ID in utilities manager.
  7. Thank you

    Thank you
  8. Thank you I will give it a try.

    Thank you I will give it a try.
  9. I put my thermometer next to the Tstat and itís...

    I put my thermometer next to the Tstat and itís reading 72. On the front end it is reading 70. How do I configure an offset on the continuum explorer.
  10. Andover Continuum calibrating sensor

    Could anyone tell me how to calibrate space temp sensor?
  11. Replies
    0
    Views
    412

    Smardt chiller via modbus

    Iím using a Honeywell jace 8000 communicating via modbus Ethernet. I have an issue with NviChillerEnable_40001. Iím writing a 1 to input 16 but it is outputing a 3. I tried emergency override,...
Results 1 to 11 of 11