Search:

Type: Posts; User: fixit52

Page 1 of 2 1 2

Search: Search took 0.01 seconds.

  1. Replies
    4
    Views
    310

    based on what your saying and what others have...

    based on what your saying and what others have said, more and more Im thinking i have a connection problem . someone else has told me where to check for the 5vdc input voltage that tells the drive to...
  2. Replies
    4
    Views
    310

    hello, it was ordered from hobart using the...

    hello, it was ordered from hobart using the model,serial and ML number but at this point it would be worth re checking. yeh the 3 phase voltage is present at the input terminals of the drive but...
  3. Replies
    4
    Views
    310

    HL 662 mixer wont run

    Hello . The mix motor on this unit doesnt start . We were told the inverter was defective by a hobart tech that was on call after hours ( normally we cant get tech support ) . So we replaced...
  4. Replies
    5
    Views
    1,559

    to follow up, didnt find any problems in terms of...

    to follow up, didnt find any problems in terms of overfilling or the unit out of level to any great degree. So i went into service menu and increased the value of the soft start. It did not leak...
  5. Replies
    5
    Views
    1,559

    thanks for that. I see it says one of the causes...

    thanks for that. I see it says one of the causes of door leakage could be soft start failure. when it blows water out the bottom of the door it happens only when the pump first starts up so im...
  6. Replies
    5
    Views
    1,559

    the weater level is at then screen. as far as...

    the weater level is at then screen. as far as being level i could check that. whers the water level supposed to be in that machine ? thanks
  7. Replies
    5
    Views
    1,559

    stero dishwasher leaking

    hello, im working on a stero model SUH dishwasher thats about a year old. when the wash pump starts there is a surge of water that comes out the bottom of the dorr, just when it starts but its...
  8. Replies
    3
    Views
    1,941

    i wish customers would do some research before...

    i wish customers would do some research before buying equipment , like find out out how well it is supported in terms of service and parts.
  9. Replies
    3
    Views
    1,941

    lainox combi ovens

    hello does anyone know where to get a manual or tech support for lainox combi ovens? just had the first one come into our area. ( Northern Ontario Canada)
  10. Replies
    4
    Views
    2,269

    I meant rinse aid sorry. And j have ordered...

    I meant rinse aid sorry. And j have ordered the pinch tube . Thanks so much

    Sent from my SM-A520W using Tapatalk
  11. Replies
    4
    Views
    2,269

    thanks im trying to prime the sanitizer pump....

    thanks im trying to prime the sanitizer pump. can that be done in the soap or service menu and does this password get you into both? the display is showing no sanitzer. the pump runs during...
  12. Replies
    4
    Views
    2,269

    Hobart lxeh passwords

    Does anybody known the soap and service passwords for this machine ? Thanks
  13. Replies
    12
    Views
    1,624

    I replaced the emptying pump which was jammed...

    I replaced the emptying pump which was jammed with scale and the emptying hose. Removed and cleaned the hose that has the level probe in it and the elbow at the bottom of the steam generator where...
  14. Replies
    12
    Views
    1,624

    Hello the vent I am referring to is the drain...

    Hello the vent I am referring to is the drain box vent not the humidity valve inlet which is there to allow air to be pulled into the oven as you said. We took the drain piping right off the...
  15. Replies
    12
    Views
    1,624

    Yeh in steam mode the hot air heat exchangers...

    Yeh in steam mode the hot air heat exchangers wouldn't be so hot so it wouldn't happen I'm guessing

    Sent from my SM-A520W using Tapatalk
  16. Replies
    12
    Views
    1,624

    yeh im now wondering if the steam generator is...

    yeh im now wondering if the steam generator is overfilling and blowing water right out onto the HE the level probe was indicating the steam generator was full after descaling but maybe fill...
  17. Replies
    12
    Views
    1,624

    Definitely not a clogged drain. Steam shoots out...

    Definitely not a clogged drain. Steam shoots out the vent too so dont think that's clogged. As for the humidity valve nite sure could check that. It's almost as if water is hitting the heat...
  18. Replies
    12
    Views
    1,624

    rational cpc 201g excessive steaming

    hello after descaling the steam generator in this unit and replacing a defective emptying pump , i found while in combi mode that at times the unit built up steam pressure in the cabinet quickly and...
  19. Replies
    7
    Views
    1,922

    thanks

    thanks
  20. Replies
    7
    Views
    1,922

    Thanks! I ordered the planetary oil today.

    Thanks! I ordered the planetary oil today.
  21. Replies
    7
    Views
    1,922

    hobart h600t mixer

    hello, does anybody know what type of oil is suitable for the transmission and planetary of an old H600T mixer? would regular 75w90 gear oil be ok?
    thanks
  22. Have you checked the venting valve( like a check...

    Have you checked the venting valve( like a check valve) on the steam generator fill hose up behind the steam generator? |If it is stuck open water will bypass as it is trying to fill and will take a...
  23. yes possible that its bypassing the dead weight...

    yes possible that its bypassing the dead weight because of this change that insert and you will find out. its just threaded in
  24. Replies
    12
    Views
    13,801

    the error 33 is telling you that the reset button...

    the error 33 is telling you that the reset button has been pressed 5 times. you need to get into diagnostics and look at the gas error code history which will give you a more specific idea whats...
  25. Replies
    15
    Views
    10,862

    Havnt been back on yet, I did clean the probes...

    Havnt been back on yet, I did clean the probes last time and told them to descale on a regular basis. maybe that did the trick.
    This machine definitely has a drain pump and its not a target.......
  26. Replies
    15
    Views
    10,862

    Thanks , I like the sledgehammer idea as well, I...

    Thanks , I like the sledgehammer idea as well, I hate these machines. Drain valve? I think it uses a drain pump, or maybe it has both?
    Thanks
  27. Replies
    15
    Views
    10,862

    wow that's good info thanks. im not really that...

    wow that's good info thanks. im not really that familiar with this model . not many in our area , a lot more SR 24h models. I could have sworn I saw two probes at the front near the wsh tank...
  28. Replies
    15
    Views
    10,862

    Hobart LXiH dishwasher

    can anybody tell me what causes an E5 recurring error on this machine? thanks
  29. Replies
    20
    Views
    5,554

    looks like a pitco wouldn't fix it though

    looks like a pitco wouldn't fix it though
  30. interesting I wish somebody had suggested that...

    interesting I wish somebody had suggested that to me before. I pulled my hair out for a while just like the op
  31. went through the exact same scenario. not with...

    went through the exact same scenario. not with propane though. the only part you didn't change may fix it, I replaced the burner itself. its a mesh burner and pretty tough to clean. doubt its the...
  32. Replies
    2
    Views
    1,663

    Thanks I will try them.

    Thanks I will try them.
  33. Replies
    2
    Views
    1,663

    trubovac vacuum packer

    Hello, does anyone know where I can get parts in North America for Turbovac machines? Thanks
  34. Replies
    39
    Views
    16,744

    interface pcb defective if all other components...

    interface pcb defective if all other components work if other componetns not working could be a fuse
  35. Replies
    39
    Views
    16,744

    do as badbozo suggested. to test in function...

    do as badbozo suggested. to test in function test, you have to first close the drain valve , then fill the drain box with the quenching solenoid so there is a reservoir of water for the cleanjet...
  36. Replies
    12
    Views
    6,584

    If its a "care control" unit and the rinse tabs...

    If its a "care control" unit and the rinse tabs are being used it should keep itself descaled. Having said that, yes I have seen it happen occasionaly but not often.
  37. Replies
    12
    Views
    6,584

    Did you try the battery reset? I work on a lot of...

    Did you try the battery reset? I work on a lot of these ovens, at this point I would do the battery reset as suggested by others. Also what software version is in it? I would also try updating the...
  38. That info would be great to have, thanks again

    That info would be great to have, thanks again
  39. the problem is probably pretty simple, and I...

    the problem is probably pretty simple, and I agree these are horrible. yes ive done an amp draw , the booster elements cycle off and on ok. the incoming hot water is definitely an issue. the hot...
  40. the fill and rinse is all the same line. its...

    the fill and rinse is all the same line. its possible that in the past the health inspectors have just been going by the temp gauges and just started using these strips. in other words it may have...
  41. no I am not entirely sure there is full water...

    no I am not entirely sure there is full water flow out of the rinse arms and those sound like good ideas to try. so your thinking the test strip the health inspector puts in there may not be getting...
  42. Also it is an electric booster. thanks

    Also it is an electric booster. thanks
  43. Thanks for the response. I am pretty confident my...

    Thanks for the response. I am pretty confident my temp probe is ac curate, I took the probe out of the booster tank and put it in a glass of hot water along with my probe, they both read the same....
  44. hobart H67e dishwasher rinse water not hot enough

    Hello, looked at this unit today because local health inspector telling customer actual rinse water temp inside cabinet is way too low. They use some kind of test strip they put in with the...
  45. Replies
    5
    Views
    2,041

    Its a fire waiting to happen I have condemned...

    Its a fire waiting to happen I have condemned many of these over the years for cracked frypots usually resulting in a fire. I would ask henny penny what they think about welding it
  46. Replies
    6
    Views
    1,829

    Start by dropping the planetary and checking the...

    Start by dropping the planetary and checking the gears in there.
  47. Replies
    4
    Views
    3,710

    They can get expensive, I have seen replacements...

    They can get expensive, I have seen replacements anywhere from 7 to 10 thousand dollars. If its allowed to do so in your state, nothing to lose by closing it up with a weld.
  48. Replies
    4
    Views
    3,710

    What is ther model number of the oven? depending...

    What is ther model number of the oven? depending on where you are located it may or may not be legal to weld it, I have seen it done, depends on the overall condition of the heat exchanger as well,...
  49. Replies
    13
    Views
    5,067

    Im not sure what you mean by low and high water...

    Im not sure what you mean by low and high water probes? I actually looked at a unit today for the same error, intermittent low water pressure . eo1.1. So the pressure gauge on the regulator assy...
  50. Replies
    13
    Views
    5,067

    hello, the error is coming from the pressure...

    hello, the error is coming from the pressure switch failing to close, look for a blockage at the screen at the triple solonoid inlet. I think you said this was an oes model, that should be a spritzer...
Results 1 to 50 of 72
Page 1 of 2 1 2